Motorcraft MERCON automatic Transmission Fluid for the automatic and manual
transaxle ( according to the Owner Guide )
The transmission drain plug on a 1999 Ford Contour 4 cylinder engine is located on the front of the transmission, behind the engine. It is used to remove the oil fluid during fluid changes.
It's a FORD Contour.
To check the manual transmission fluid in a 1999 Ford Contour, first ensure the vehicle is on level ground and the engine is off. Locate the transmission fill plug on the side of the transmission case. Remove the fill plug using the appropriate tool, and check the fluid level; it should be just below the fill hole. If necessary, add the appropriate type of transmission fluid until it reaches the correct level.
Motorcraft MERCON automatic transmission fluid is used in the automatic and the 5 speed manual transmission ( transaxle ) according to the 1998 Ford Contour Owner Guide
Usually you just fill it from where you pull out the tranny dipstick from. Just get a funnel with a little hose attched at the bottom and start pouring in. Where is the transmission filter on contour 99
The transmission plug on a 1995 Ford Contour is located on the side of the pan. It allows for fluid to be quickly drained during maintenance.
According to the 2000 Ford Contour Owner Guide : For the manual transaxle ( transmission ) ( 2.0 U.S. quarts of Motorcraft MERCON automatic transmission fluid )
Any SAE certified transmission fluid can be used in your 1999 Ford. Ford automobiles use the same transmission fluid as other makes of cars.
Does it have a dipstick?
Next to the brake fluid refill cap.
The 4 cly is on the bottom of the transmission .
Ther is no such fluid get new clutch if its having problems