The sensors are in the door itself. It seems to be very normal for these sensors to break. I just take out all the light bulbs, therefor I never have a dead battery. But, check with Ford for the part, and now you will have to figure out which door is the problem.
on my 98 crown vic you have to push in the head light switch
Take the bulb out.
Yes, if it is the same year.
There should be a SWITCH at the dome light! If not, remove the fuse from the fuse box above where your gas pedal is. OR: Simply remove the BULB from the dome light. duncanw.
You can see the blueprint of the door on a 1997 Grand Marquis/Crown Victoria at the related link below. This will aid in the removal of the panel.
Yes
there is a button to push on the bottom of the drivers door
It is on the left hinge of the trunk
The 199x and newer Crown Vics have a door position sensor not a Pin Switch. Hope this helps! Radioman
To put the 1995 Crown Victoria windows on track, a person has to remove the door panels from the doors involved. The first step in removing the door panels is to remove any light lenses in the door. Then the panel can be taken off by popping the clips around the door.
You can't. Have to replace the hinge.