There should be a SWITCH at the dome light! If not, remove the fuse from the fuse box above where your gas pedal is. OR: Simply remove the BULB from the dome light. duncanw.
Yes, they are identical
If your air bag light is on there is a problem. Have the Air Bag system serviced by a qualified service technician. Turning the light off will not solve the problem.
Take the bulb out.
on my 98 crown vic you have to push in the head light switch
You need to remove the fuse for it, for that you'll need a manual for that model and year. The above answer is incorrect, sure you could do that but!!!! Check in the glove box to see if there is a round push button switch. If there is and it wasnt removed- this button will disable the traction control. To verify that it is off there will be a light that says traction control that will light up on the instrument panel. It will reset back to ON everytime the car is shut off. This is on a 1998 p71 Crown victoria, an LX Vic should be the same.
Antilock brake system
On a 2003 Ford Crown Victoria : ( fuse # 20 is a 20 amp fuse for the spot light ) In the fuse panel under the drivers side of the dash
Normally this is an indication of a defective brake light switch.
A wrench light on any car means the engine needs attention.
just change the bulb!
It's on the arm of the brake pedal.
Problem with the ABS system.