0
What else can I help you with?
How do you replace rotors on 2003 buick rendezvous?
By using a qualified well paid professional! I ended up taking my rotors and pads back to Auto Zone
How do you replace rotors on 2003 Ford F350?
The rotors on a 2003 Ford F350 are replaced by jacking the vehicle up, removing the wheels, taking off the calipers, and removing the bearing caps. The retaining nut can then be removed, the rotor pulled, and a new rotor put in place.
How do you replace the fuel gauge on a 1992 ford bronco?
To replace the fuel gauge on a 1992 Ford Bronco, begin by disconnecting the battery to ensure safety. Remove the instrument cluster by taking out the screws and gently pulling it out of the dashboard. Disconnect the wiring harness from the back of the cluster, and then remove the old fuel gauge. Install the new gauge by reversing this process, reconnecting the wiring, and securing the instrument cluster back in place.
How do you Remove rear brake rotors on 2003 ford f350?
start by taking the tires off
Replace front rotors on 2004 Mitsubishi Montero Sport AWD?
If it's anything like my 01 montero 4x4, its not fun. you have to remove the wheel bearing, and repack it. takes time and patience. your better off taking it to a garage for this one.
Where can I find a guide on how to replace a car brake?
You can repair the brakes on your car by getting the needed parts from an auto store then either taking the car to a mechanic or finding a step by step instructions.
What are the step by step instructions for taking off the front rotors on a 1990 Ford Festiva?
Th easiest way to change the rotors on a 1990 Ford Festiva is to pay someone. However, remove the tire, remove caliper, remove the hub nut and washer. Remove the rotor from the CV axle. There four bolts on the back side of the rotor, but you may have to press out the rotor bearing. To re-install read backwards
Where can i find fuse box diagram for 89 ford bronco 2?
You can find the fuse box diagram, for your 1989 Ford Bronco, by taking the fuse box cover off. The diagram of the fuses is on the bottom of the cover.
How do you change a valve body in a 1982 Ford Bronco with a 302 and a c6 transmission?
if you have the valve body and you kno what your doin you drop the pan, remove the valve body bolts drop it straight down then install the new, but id recommend taking it to a tranny shop to have them replace it for you.
How do you remove the ignition on a bronco II?
To remove the ignition switch on a Bronco II, first disconnect the negative battery cable to ensure safety. Then, remove the steering column cover by unscrewing it, followed by detaching the ignition lock cylinder. Finally, unscrew and remove the ignition switch from its mounting, taking care to note any wiring connections for reinstallation. Always refer to a repair manual for specific instructions related to your model year.
What's the cost for replace a new brake?
You can repair the drum brakes on your car by getting the needed parts from an auto store then either taking the car to a mechanic or finding a step by step instructions and costs about 100.
Can you remove and replace oil pan gasket by just dropping the pan a few inches and not taking it all the way out of 1989 Ford Bronco full size?
yes you can but I wouldn't recommend it because you will need to make sure all of the old gasket is off or it will just continue to leak
