According to the 2001 Mercury Villager Owner Guide :
The fuel pump shut off switch ( inertia switch ) is in the
drivers foot well , behind the kick panel ( there is an
access hole )
* from the drawing it is near the inside hood release
The fuel pump does not normally have to be "reset". If the vehicle is in a crash that causes the inertia switch to trip, the switch will have to be reset before the fuel pump will run.
The filter is located behind the RH side of the carbon canister under the hood.
The fuel pump reset switch is on the driver's side kick panel.
20 gallons. http://consumerguideauto.howstuffworks.com/2001-mercury-villager-3.htm a simple Google search yields amazing results!
behind the drivers side kick panel
No, there is no direct connection.
At the top of the driver's side kick panel.
The fuel pump is mounted on top and inside the fuel tank.
Under the vehicle, approximately in the middle, driver's side.
At the top of the driver's side kick panel.
In the drivers footwell , behind the kick panel . There is an opening in the kick panel to access the red reset button on top of the switch
If you mean the inertia reset switch, it's in the driver side kick panel.