0
What else can I help you with?
Where is the oil pressure switch is located at in a Chevy 4.8 1999 Chevy pickup?
The Oil Pressure Switch is located on the driver's side top rear of the engine on your Chevy Pickup.
Where is the ac orifice on 1995 Chevy 1500 pickup?
in the expanded line coming from the evaporator in the core support. You nee to pull the grille to gain access. Good luck breaking the fitting loose! Jeff
What should you do if you have a leak that seems to be coming from the fitting for the hose on the brake booster of your 2006 Chevy Pickup?
need to replace the fitting, or remove it and put some plumers tape on the threads
What is fuel pressure on a 1994 Chevy pickup?
We are going to need to know what engine it has.
Where is the ac orifice tube located on a 98 Chevy pickup with a 5.7L V8?
It is located on the condenser in front of the radiator. Easy to access if you remove the grill and disconnect the high pressure line.
Why do you have no pressure in the fuel injection in your Chevy S10 pickup truck?
The fuel pump is kaput.
Where is the water in heater blower coming from 1998 Chevy k20 pickup?
Heater core? Inlet or outlet hose fitting at heater core?
Where is the ac recharge fitting on a 1996 Chevy lumina?
It is near the back of the air filter box - that is just on the firewall side of the box. The fitting on the larger tube is the low pressure side which is what you want to use. You will see two fittings there the low pressure fitting is the one on the bottom with the high pressure fitting above it. This means the one you want to get at is harder to access - figures right? If you can't attach your recharge hose easily you may want to loosen or remove the air filter box.
What is the recommended tire pressure for 1996 Chevy S-10 ZR2 4x4 pickup?
32psi
How much fuel pressure for a 1998 Chevy pickup with a spider system?
60 to 66 psi
Where is the fuel pressure regulator located on 91 Chevy 1500 pickup?
It is located in the throttle body.
Your clutch fluid is leaking near the passenger side of the trans on your 1989 Chevy pickup what could it be?
Perhaps slave cylinder, line or fitting leaking?
