where is the valve located on the 2002 ranger 4.0 liter 6 cyl?
The pump is electric and is located in the fuel tank.
the slave cylander is located in the transmission on the 2002 Ford Ranger. Better see a mechanic to do the job.
The 2002 Ford Ranger camshaft position sensor is located on the back of the camshaft. The rear engine plate will need to be removed in order to view the sensor.
On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.
i have one of the 2002 models. it is stamped in the frame on the left hand side. Turn the wheels to the right and look at the angle in the frame it is stamped near the top of the frame
The firing order for a 2002 ford ranger is 1-3-4-2. The number one cylinder is at the front of the engine.
Fuse #17 controls the power to power windows on a 2002 Ford Ranger. The fuse is located under the dash on the driver's side of the car.
Should be bolted to the left fender.
( fuse # 1 ) is a 5 amp fuse for the power mirror switch on a 2002 Ford Ranger
follow the top radiator hose to the engine, the thermostat is located in the housing that that end of the hose is connected to
Check under the truck about in line with the seat . You may need special tools to change it. the fuel pump for a 2002 ranger is located in the gas tank. pulling the bed off is easier than dropping the tank for this repair