Just follow the top radiator hose to were it clamps onto the engine, That will be the thernostat housing, just remove that housing and it will be right there. You will need to drain engine coolant first. MAKE SURE ENGINE IS COLD. That is if the engine is a 5.7L 350.
If it is something other then a 5.7L 350. Then the thermostat will be were the lower radiator hose clamps onto the engine, That will be the thermostat housing, remove it.
If it is a V6 engine then it will be at the end of the top hose, just like the 350 engine.
where is knock sensor located on a 99 Silverado 1500 4.3
It is on the intake manifold near the thermostat housing.
you blow it up
classic '99? If not then yes, most I think.
sliverado 1500 99-05 torque setting is 140 ft-lbs
Again, not a professional car (hearse or ambulance ) question and I am not a mechanic
The spring goes down in the engine
The maximum towing capacity of this 1999 Chevrolet Silverado 1500 is 5,000 pounds. However, a limit of 3,500 pounds is recommended.
The starter relay on that 99 Silverado is located in the under hood power distribution center.
follow the upper radiator hose it would be right at the end of that
Yes, From 88 to early month of 99 will interchange.
follow the top radiater hose to the engine should be two bolts and the thermostat valve should be behind that