The 1993 Mercury Sable backup light relay switch can be found beneath the drivers side dashboard. The backup light relay switch will be above the accelerator pedal.
This is part of the neutral safety / transmission shift location switch / back up light switch. It is mounted on the transmission behind the shift sector shaft. The shift cable will run from the shifter to the transmission and this switch is mounted there on the side of the transmission.
The most common cause of a dome light staying on in a Mercury Sable is electrical issues. If a fuse becomes disconnected or is loose this can cause the light to remain on. Check the dimmer switch and the plunger switches in the door jambs.
location for fuse, and relay switch on a Mercury Sable
how do i change out a power steering switch on a 2001 mercury sable with a 3.0 engine?
The switch located on the door frame may be broken is a dome light stays on in a Mercury Sable. The switch may need to be repaired. If that is not the issue, a mechanic can diagnose the issue. Another way to help find a solution is to look in the owner manual or repair book for the car.
This car does not have daytime running lights.
My auto lamp light sensor is not working on my Mercury Sable 2002. Why?
On a 1996 Mercury Sable : The fuel pump shut off switch ( inertia switch ) is in the trunk , behind the trunk liner on the passenger side ( there is an access hole )
On a 1999 Mercury Sable wagon : The fuel pump shut off switch ( inertia switch ) is in the cargo area , behind the service panel on the passenger side
In a 1999 Mercury Sable the fuel pump shut off switch ( inertia switch ) is located behind the trunk liner , on the right side ( passenger side ) There is an access hole
On a 2003 Mercury Sable sedan : The fuel pump inertia switch ( shut off switch ) is in the trunk , on the passenger side of the trunk , behind the trunk liner ( there is an access hole )
under dash on drivers side