The Ford Transit T300 was produced from the years 1965 to present. The location of the radiator expansion vessel in a Ford Transit T300 is next to the radiator.
With an Easy-Out.
At the bottom of the radiator, you can see it from under the truck.
At the BOTTOM of the radiator on the drivers side. OR just take the bottom hose off at the radiator.
A person can bleed the clutch on a Ford Transit Van by hooking a bleeder hose to the slave cylinder, placing it into a small jar of hydraulic fluid, and loosing the bleeder screw. The clutch is then slow pressed until no air bubbles are present.
google it, it should help you. who do you think people who answer this, get there answer from.
at the bottom of the radiator either side
You will find it under the air filter (easy to remove filter btw). AB
top radiator hose, Engine side, metal nippile that attaches hose to motor,,,,,,,,,,,,,, Its under the nipple Top radiator hose,, engine side,,metal nipple that attaches hose to motor,, its under the nipple,,,,,,,,,,,,,,,,, be sure to put the new t-stat in with the larger brass side toward the motor.
Ford Transit was created in 1965.
I assume you meant 95 Ford Contour. There is no bleeding when replacing antifreese. Just fill the radiator recovery tank as there is no radiator cap on these vehicles.
How do you override ford transit deadlocks?