On the drivers side of the engine near the exhaust manifold.
== == On my 1995 Ford Explorer 4.0 L OHV ( same engine ) from end of " blade " to the plastic cap on the dipstick is ( 21 and 3/8 inches )
where is the number 3 cylinder located on a 2.5 ford ranger engine
the dipstick is located between the brake master cylinder and the valve cover.
To change the oil dipstick assembly on a 2000 Ford Ranger with a 4-cylinder engine, first ensure the engine is cool and disconnect the negative battery cable. Remove the dipstick from the tube, then locate the retaining bolt or clip that secures the dipstick tube to the engine block and remove it. Carefully pull the dipstick tube out of the engine, and then install the new dipstick assembly by reversing the process, ensuring it's properly seated and secured before reconnecting the battery. Always check the oil level after installation.
the dipstick should be located on the driver side of the engine, pretty close to the brake fluid holder, or right in front of the middle spark plug hole on that side
The engine oil dipstick is on the drivers side of the 4.0 liter V6 engine in your 1999 Ford Ranger Helpfull
No , the 2.3 liter 4 cylinder engine in a 1997 Ford Ranger is not an interference engine
No , the 2.5 liter - 4 cylinder engine in a 1998 Ford Ranger IS NOT an interference engine
The 4 cylinder engine is 2.3 liters ( 140 cubic inches ) in a 1994 Ford Ranger
The 2.3 liter DOHC , 4 cylinder engine in a 2006 Ford Ranger has a timing CHAIN
The front engine cylinder
In a 2000 Ford Ranger, the engine oil dipstick is located on the driver's side of the engine bay. It typically has a yellow or orange handle for easy identification. To check the oil level, simply pull the dipstick out, wipe it clean, reinsert it, and then pull it out again to read the level.