1991 to 1994, then again in 1996 to 2004.
The Oldsmobile Bravada is a sports utility vehicle which was manufactured by GM's Oldsmobile division. There are many listed for sale on Auto Trader which one may find suitable. One can also inquire with local car dealerships for used models.
Dome light fuse for 2004 Bravada is fuse#4 (10amp) in fuse box underneath back seat on driver's side
To replace the headlights on a 2004 Oldsmobile Bravada, first, open the hood and locate the headlight assembly. Remove the screws or bolts securing the assembly, then gently pull it out. Disconnect the electrical connector from the back of the headlight bulb, replace the bulb with a new one, and reconnect the electrical connector. Finally, reinsert the headlight assembly, secure it with screws or bolts, and close the hood.
the tire pressure sensor is usually the valve where you inflate or deflate your tire. it is made complete with valve
Assuming that you mean "wiper blade" (blade and frame) which are replaced often rather than "wiper arm" (piece from the spindle at the hood to the wiper blade) which are rarely ever replaced, the 1991-1994 Oldsmobile Bravada has "3/16" side lock" wiper arm attachments and the 1996-2004 Oldsmobile Bravada has the most common hook-end wiper arms. See Sources and Related Links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Its very easy.
To replace the power steering pump on a 2004 Oldsmobile Bravada, first, disconnect the negative battery terminal and remove the serpentine belt. Next, drain the power steering fluid and disconnect the pump's hoses and electrical connections. Remove the mounting bolts to take out the old pump, then install the new pump by reversing the process, ensuring all connections are secure and refilling the power steering fluid before testing the system. Finally, check for leaks and proper operation.
Oldsmobile ended in 2004.
In a 2004 Oldsmobile Bravada, the coolant temperature sensor is typically located near the thermostat housing, which is situated on the engine block. It is usually found on the intake manifold or near the water outlet. To access it, you may need to remove some components, depending on the engine configuration. Always consult the vehicle's service manual for precise location and removal instructions.
The Buick Rainier was first introduced by General Motors in 2004. The Buick Rainier was made as a replacement to the Oldsmobile Bravada and was the first truck sold under the Buick brand.
no you cannot use it in 2004 Oldsmobile alero
You're likely looking at the oil pressure sending unit.