answersLogoWhite

0

Your brake light switch under your pedal is brobaly stuck

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What fuse feeds the brake lights in a 2000 mercury cougar?

try fuse 24


What to do if my 1999 Mercury Cougar has no brake lights and the bulbs and fuses are fine?

check the switch at the break peddle


Brake fluid 1993 mercury cougar?

A 1993 Mercury Cougar takes ( DOT 3 brake fliud )


How do you reconect brake lights on Mercury Cougar?

To reconnect the brake lights on a Mercury Cougar, first ensure the vehicle is turned off and the keys are removed from the ignition. Check the brake light bulbs for any burnouts and replace them if necessary. Inspect the wiring harness connections at the brake light assembly for any loose or damaged wires, and reconnect or repair them as needed. Finally, test the brake lights by pressing the brake pedal to confirm they are functioning properly.


How do remove the brakes on a 19 94 mercury cougar?

Remove the tire and wheel from your 1994 Mercury Cougar. Remove the brake spring and brake caliper. The brake shoes will come off.


Where is slave cylinder reservoir for a 2001 mercury cougar?

The brake and clutch fluid systems are supplied by the brake fluid reservoir ( according to the 2001 Mercury Cougar Owner Guide )


Clutch fluid reservoir on a 2000 Mercury Cougar?

On a 2000 Mercury Cougar : The brake fluid reservoir is also the clutch fluid reservoir


1990 Mercury Cougar won't start how can you jump or eliminate the switch on the brake?

Your brake light ignition switch should be replaced. It works your brake lights and ignition switch, so you do need it. It only costs about $7 dollars.


How do you replace the rear disk brakes pads on a 1999 Mercury Cougar?

Remove the tire and wheel from your 1999 Mercury Cougar. Remove the brake spring and the break caliper. The brake pads will come off. Reverse the process to install the new brake pads.


What brake fluid for 96 cougar?

According to the 1996 Mercury Cougar Owner Guide : ( DOT 3 brake fluid , meeting Ford specification ESA-M6C25-A )


Where the brake light relay is on a 2000 mercury cougar or why the brake lights wont work the fuses and lights are good?

Check the brake light switch first. It is usually near the brake pedal under the dash. A bad turn signal switch can also cause this if the brake lights are also turn signal lights. If the brake lights are independent of the turn signals then disregard the switch problem. A good wiring diagram will help to diagnose the problem also. Check with dealership mechanics as they have access to diagrams.


Why my car Mercury Cougar doesn't have a brake light all three?

Blown fuse