0
What else can I help you with?
Your license plate lights won't come on after checking bulbs and changing fuse?
the wirehas been eaten by rates of mouse
Why are the brake lights on 1999 Monte Carlo not working after changing bulbs and Fuses?
Brake light switch on the brake pedal is defective
License plate lights out on 2003 Chevrolet avalanche?
Check bulbs
What would be the cause of no tail lights and no cluster lights when the fuses and bulbs are working?
If the parking/tailight fuse is good - then it may be a bad headlight switch No tail lights but the bulbs are working? Please explain.
What are the regulations concerning motor vehicle lights?
All motor vehicle lights must be in working condition. Head lights, break lights, tail lights, and even the light above your license plate must have working bulbs. Also if the casing is broken the appropriate colored tape must to put over to illuminate the needed color.
Why are the tail lights and license plate lights not working but the turn signals and brake lights and reverse lights are and you already replaced the bulbs and fuse?
Try replacing the headlight switch. Do the front parklights work and not the rear ones? If so check the harness to the rear of the vehicle for breakage.
Why are my reverse lights not working on my 1999 corsa?
have you checked the bulbs and fuses
Why are the lights inside the console not working on a 1998 Plymouth neon?
check your bulbs and fuses check your bulbs and fuses
Your brake lights work when you brake not when you turn lights on?
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
If the fuse for the brake lights is working what is the next thing you should check?
If the fuse is working, then check the bulbs.
Your brake lights will not work on a 1994 ford escort you have already replaced bulbs and fuses?
Working brake lights are important for safety reasons while driving. It is important to check all of the wiring, if the brake lights are not working and the fuses and bulbs have been checked.
Break lights not working?
if the bulbs are not bad, it is the fuse, if the fuse is good, its the wiring.
