0
What else can I help you with?
1999 VW Jetta why are none of my brake lights working but turn signals and reverse lights are?
Could be the brake light switch or fuse.
What fuse controls the brake lights on 2001 Dodge Van all lights and trn signals work except no brake lights when brake pedal is pushed?
It is not necessarily the fuse. It could be the switch on the brake that is not closing the circuit.
1994 Chevy silverado all 3 brake lights and tail lights don't work but signals do?
if the tail lights work but not brake lights then its most likely just a blown fuse or it could be the switch at the top of your brake pedal arm.
What can cause the brake lights not to work but the turn signals do?
Could be a bad wiring harness, disruption of the circuit somewhere between the brake pedal and the brake lights, a bad switch which fails to actuate the brake lights. See sources and related links below for bulb information.
My park lights and turn signals work but your brake kights dont why is this?
it could be that your brake light switch under your dash that sits right on top of your brake pedal has gone out
Why don't your brake lights work on your Chevy s-10?
You may have blown a fuse. You may have to replace your brake light switch which is located above the brake pedal under the dash. Also it could be your emergency flasher knob if its broken. All of your turn signals and break lights run through it and if the connections on it are off none of the brake lights and turn signals will work.
Hazard lights and brake lights don't work but the turn signals do?
possibly the fuse for brake lights......also could be brake light switch----turn signal switch----broken wiring anywhere in the vehicle---relay not working ---any other item specific to your venicle.
Why won't 1999 Chevy Malibu tail lights work good bulbs good fuses back up lights work and the turn signals work?
It could be the brake light switch (the switch that activates the brake lights when you step on the brake pedal) has gone bad
Why don't my brake lights and tail lights don't work but turn signals do on a 1988 Jeep Comanche?
If your brake lights and tail lights aren't working while the turn signals function normally, the issue could be due to a blown fuse, a faulty brake light switch, or a bad connection in the wiring. The turn signals operate on a different circuit than the brake and tail lights, which is why they still work. Check the fuse box for any blown fuses, and inspect the brake light switch located at the brake pedal for proper function. Additionally, examine the wiring and connections for any signs of damage or corrosion.
1985 dodge ram the tail lights wont work with the lights on both turn signals blink when you turn on the drivers side and there are no brake lights with the lights on what could be the problem?
check your ground wire in the back
What could cause a 99 Chevy Malibu's left tail lights not to work but brake-turn do?
To be more specific, the ground wire must work and the bulbs, fuses, etc.. Or the back up lights and turn signals and brake lights wouldn't work? Right? Could it be the back panel...and still let the brake/turn/backup lights work? I need help fast. Thanks!
1979 Dodge B200 Sportsman V8 brake pedal makes all signal lights come on with brake lights the hazards or signals don't work on their own could it be a flasher?
On the 1979 B200 Sportsman V8 if the brake pedal makes all signal lights come on and hazards and flashers do not work on their own, it could be the flasher, but the culprit could also be a burned out bulb or a short in the wiring.
