If your brake lights and tail lights aren't working while the turn signals function normally, the issue could be due to a blown fuse, a faulty brake light switch, or a bad connection in the wiring. The turn signals operate on a different circuit than the brake and tail lights, which is why they still work. Check the fuse box for any blown fuses, and inspect the brake light switch located at the brake pedal for proper function. Additionally, examine the wiring and connections for any signs of damage or corrosion.
Check fuses and bulbs first.
check fuses then check all the bulbs, then check the turn signal switch the brake lights work through it
If the brake lights on a 1988 Jeep Comanche are functioning while the tail lights and dash lights are not, it could indicate a problem with the tail light circuit or the associated fuses. A blown fuse specifically for the tail lights or a bad ground connection could prevent them from lighting up, while the brake light circuit remains operational. Additionally, the issue may stem from a faulty switch or wiring in the tail light assembly. Checking the fuses, grounds, and connections would be a good first step in troubleshooting the problem.
There is no switch to activate or deactivate the brake lights on a 1988 Nissan. The brake lights automatically turn on any time the brakes are pressed.
== ==
u need to replace flasher can in your vehicle This could happen if flasher had hazzard flasher "on" and could be broken so it will not turn off. (I assume center brake light still works) if so, need new flasher switch in steering colum or find a way to rewire brake lights from brake light switch to rear lights. This is just a guess. Be sure brake light switch is OK.
No.No.
Do you mean What does it mean when the brake and battery lights come on in when it is already started? Check your alternator may be its not working well it cause the battery sign comes out.
I assume from your question that you may be looking for Comanche taillights? Since Jeep quit selling them about 3 years ago, they have been very hard to find. Due to the limited production of the Comanche, aftermarket companys have not reproduced them and they lights have actually become quite rare. If you search Jeep Comanche taillight on eBay you may have some success if you are persistent.
I'm not sure why the front turn signals would work but not the back, however I had a similar problem and had to replace the two relay fuses on the firewall just behind the fuse box. These will look differant than the regular fuses. They are aprox. one inch in diamiter squared and one is one in. long, the other is one and onehalf in. long. Good luck!
In the 1988 Mercedes SL, dashboard warning signals include indicators for oil pressure, battery charge, and brake system alerts. A check engine light may also illuminate if there's an issue with the vehicle's emissions or engine performance. Additionally, the car features warning lights for coolant temperature and low fuel levels. It's essential to address any illuminated warning signals promptly to ensure the vehicle's safety and performance.
Answerpull the bulbs on the left and make sure they are not in with the tits in the wrong position. That is lower teet in the upper slot of the socket.