Automatic or manual trans? What am I missing here? Explain! If it is stuck in 3rd gear then it is obvious that it can't go in reverse.
Park Reverse Neutral Drive 3rd gear 2nd gear Low gear
1st 2nd 3rd 4th 5th & Reverse gear
i have a 95 ford aspire automatic..rebuilt the trans but high gear and reverse does not work when wheels are on the ground...no power..what can i do I have the answer to both questions email me at elccabron@hotmail.com and I will send the diagram and the service prcedure to fix the no reverse and 3rd gear problem
There is no drive in a standard transmission car. In most cases you will have reverse, neutral, 1st gear, 2nd gear, 3rd gear, 4th gear, and 5th gear.
do you have 1st 2nd and 3rd gear, if one of them dont work your transmiton is gone, that is what im going with. motor does not have anything to do with your gears
It stands for: Park=P Reverse=R Neutral=N Drive=D 1=1st gear 2=2nd gear 3=3rd gear
Reduction ratios: 1st gear 2.45:1 2nd gear 1.45:1 3rd gear 1:1 Overdrive 0.69:1 Reverse 2.22.1
specify "not go into drive" does that mean it stalls or?
The input sunshell splines have stripped or the hub has broken off. This will give you 1st + 3rd gears only with no reverse, 2nd, or 4th gear.
From page 46 of a 1966 Volkswagen Owners Manual, the gear ratios are: 1st gear 3.80:1 2nd gear 2.06: 1 3rd gear 1.26:1 4th gear 0.89:1 Reverse 3.88: 1
I had this problem in my 2007. the forward sprag was broken. i still had 1st, 2nd 3rd and reverse but no drive.