crankshaft sensor
no
Will it start after setting awhile? Check the crank shaft sensor.
Start checking out your engine and transmission mounts. Check the rubber to make sure it isn't torn.
its not your ignition its your crankshaft sensor that's the same problem i had.
Well I had problems with my radio working while the car is running and all I had to do is get a stronger fuse I think it was a 10 and we put a 20 and its been fine ever since.or if its a 20 put a 30 etc.
The crank sensor had to be replaced on my 98 Catera when it was doing the same thing. I had to take it to the dealer to have this done.
Clean your battery terminals.
Mine does but i think it is electronic controlled for one starts to spin the other wheel will start working for more traction. i done a burnout that's how i figured
2000 catera sometimes wont start & you have to work the remote to get it to start ? Mybe it has something too do wiht the security system?????
The head lights, radio, and eveything else works, but the car will not start. I checked the starter and it was good. The battery is good, but whatever it is causes the battery to have a low charge. Could it be the alternator
I'd start with the crankshaft position sensor cheap fix (50-60) bucks & easy to install if that doesn't work come back and update i hope this helps
To remove the radiator from a 2000 Cadillac Catera, start by disconnecting the battery and draining the coolant. Next, remove the upper and lower radiator hoses, and disconnect the transmission cooler lines if applicable. Unbolt any mounting brackets and the fan assembly, then carefully lift the radiator out of its housing. Make sure to check for any remaining connections before fully removing it.