Check your crank sensor. It is located on the drivers side of the transmission where the flywheel is.
im not getting fire to the spark plugs but the distributor is getting fire what do i do please help
IT IS A BAD IGNITOR ON THE INSIDE OF THE DISTRIBUTOR.
dodge 360 getting fire to coil none from dist
it has to be the distributor cap or rotor or wires...plug wires.
i have same problem had to change the distributor
Check to make sure your getting fire at the Distributor Cap, if not, then try replacing the cap and rotor button. If that doesn't work, you may need a new distributor.
ignition control module in the distributor
Your ignition module may be out. Or your distributor is out. What kind of vehicle?
I would replace the module in the distributor. Take the distributor cap off and it will be the idem that has 2 small screws that hold it on the base of the distributor, and it will have electric wires that hook to it. The module controls the fuel and fire.
Have you checked all of the High Tension leads from the distributor to the plugs, or just one or two? Same with HT lead from Coil to Distributor, Check Distributor cap for cracks
what to look for no fire from distributor on 5.2 liter doge ram
The spark travels from the coil to the distributor then from the distributor to the plugs. So if you have spark going into the distributor but not coming out to the plugs, I would blame the distributor cap and rotor being at fault.