Your 1999 Ford Ranger may not be shifting out of first gear due to several potential issues, including low Transmission Fluid, a faulty shift solenoid, or a malfunctioning transmission control module. Additionally, it could be related to a worn or damaged clutch (in manual transmissions) or issues with the throttle position sensor. It's advisable to check the transmission fluid level first and consider taking the vehicle to a mechanic for a thorough diagnostic if the problem persists.
Possible bad trnsmission filter. Replace filter. HAve you checked the fluid level? or added the wrong fluid?
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
A 1990 Ford Ranger may not shift into gear if the clutch is out. A clutch can be purchased at any auto parts store.
how to remove a power steering gear box for a 1990 ford ranger 2.9
So 1st gear doesn't work....what about it? Ask a proper question and maybe it will get answered!
There are several things that can cause your 1999 Ford Ranger to grind when you put it into gear. The most common cause is a lack of transmission fluid.
The gear shift knob on a ford Ranger is pressed on tightly. A heat gun or hair dryer can be used to heat the knob to help remove it.
Be sure the vacuum supply line from the engine to the transmission vacuum modulator is not disconnected.
Loss of power when shifting into gear. Changed fuel filter/ pcv and top hose. PVC lower hose hard , could this be my problem. gwbrown@usbr.gov
It is important to have the right fluid in a car to help it run smoothly. For a 1992 Ford Ranger with a Manual Transmission the best gear oil is Mercon V.
i have a ford focus 1.8 petrol S reg. When i put it into reverse gear it jumps out what is the problem please ?
I ASSUME axle code " 86 " is the same as it is on the ( 1996 ) Ford Ranger ( 3.73 gear ratio , conventional / non - limited slip )