brake light or lights out. all 80's n newer cars have this let me know if it is it
- vacuum check valve (under ignition on driver side)
- vaccum tank (in front of front driver side wheel)
- vacuum hose (all, including the one going to the vacuum release valve on the brake pedal)
- vacuum release valve on the brake pedal
- electrical switch on the brake pedal
- turn signal lever (cruise control)
- cruise control servo
- cruise control module (part of the digital dash), in particular the transistors driving the vacuum valves in the servo
Made a detailed article here. It is in french, post a personal message in the forum if you need help with translation or anything else. I had 3 issues in my cruise and cured them all including digital cluster problem.
http://corvetteclubfrance.forumactif.com/electricite-et-electronique-f13/c4-cruise-controlremplacement-des-transistors-de-commande-t6628.htm
If the cruise control on your 1987 300ZX does not work, you might have an issue with the cruise control fuse or wiring. You could also have a problem with the switch that turns the cruise control on and off.
First step might be checking the vacuum lines in the engine bay. If the cruise control unit does not get vacuum it will not work. Second, the brake light switch might be suspect at that age, it might be sticking or not working. Last, the buttons inside the car or the cruise control unit might have failed.
My front left (driver's side) brakes caught on fire and my cruise control hasn't worked since. You might want to check the connection from the cruise control to the brakes....
I assume you mean the aircraft and the automatic control device in your parameters. The obvious answer is no, for about the same reason such a device could not be practically applied to say, a construction crane, there are too many rapid adjustments and parameters, no ( cruise control) operation, so to speak. There might be something akin to power-shift or automatic transmission, but that is different.
The most probable cause for your malfunctioning cruise control is a blown fuse. The fuse might have blown while you were changing your switch. The cruise control fuse can be found in the fuse box.
If the cruise control will not engage, there might be a problem with the Electronic Fuel Injector or the MAP Sensor. There might also be a problem with the Oxygen Sensor. Some autos have more than one oxygen sensor.
Hello, Can't think of ideas of how you can break you're cruise Control repair, but the best thing to do is go to B and B (body and paint Fire Stone. Excedrea excedera) and see if they can repair the cruise control button and that's the easiest way to go but if the cruise control is really broken you might want to swap out the steering wheel
Are you sure EMC Might be ECM Electronic control modual most likely.
You need to check if your car is equipped with cruise control. to do so look at your vin number. the 8th letter should be C. if not the cruise control is located at the base of your right leg. sometimes it might be covered by a shoe, if so untie. good luck Jeff.
To fix the cruise control on a 2000 Dodge Caravan, first check the fuses and replace any that are blown. Next, inspect the cruise control switch and wiring for any visible damage or disconnections. If those components are functioning properly, the issue might be with the speed sensor or the cruise control module, which may require testing or replacement. If you're unable to diagnose the problem, consulting a professional mechanic is advisable.
There are several potential reasons why the cruise control might not work on a 2006 Hyundai Santa Fe. Common issues include a malfunctioning cruise control switch, a faulty brake pedal switch, or problems with the vehicle's speed sensor. Additionally, if the check engine light is on, it may disable the cruise control system. It's best to have the vehicle diagnosed by a professional to pinpoint the exact cause.
Yes, the Ford E-350 diesel can be equipped with cruise control, but it depends on the specific model year and trim level. Many newer models come with cruise control as a standard feature or as part of an optional package. If your E-350 is an older model, you might need to install an aftermarket cruise control system. Always refer to the owner's manual or consult a Ford dealership for the best options for your vehicle.