the plastic needle in the dash or the colum is broken either the collar that goes around the steering column is loose or broke-The clip that holdes the string has come off - OR the string is Broke.Not liely that the needle fell off.
Short in dash cluster is common on mazda tribute
It is mounted on drivers side of transmission under the transmission gear shift linkage. It has a single connector on it and it is also used to control the shift position indicator on the dash (so you know what gear you have selected. Make sure you plug the connector in all the way till it snaps in place or the indicator will be completely wronr in it indication of position
It was the speed sensor. and it could also be the DRAC. Which is a speed sensor buffer that is located behind the dash to the left of the glove box. It is a white box.
On your truck, you will have to replace the cluster in the dash. You will need to take it to your local dealership to have them order it. I would let the dealership install it, because the new cluster will have to be programmed. I hate to send you to a dealership because they cost an arm and a leg but that is about the only option you have. You might be able to find an aftermarket cluster, but it might not work correctly. I hope this helpful.
you need to buy a new one. it must be the correct legnth with no play or you will have transmission out of sync with gear indicator or worse pop out of park by itself.sorry i just reread question.not sure if you are asking about actual shifter cable or gear indicator on dash or console
That would more then likely be the EGR VALVE
Left to the Shift Stick is a general power switch for all gears across the transmission. Operates the Power indicator light on the dash as well. It allows the car to rev out a little longer between gear changes. For added pick up.
i believe it would be 3.11
A gear indicator on a motorcycle displays which gear the bike is currently in, helping the rider to easily monitor and adjust their speed and engine performance.
put the parking brake in, then put the truck in 1st gear pop the dash cover off and then remove bolts from stereo.
The gear indicator on your vehicle's dashboard may show the wrong gear due to a malfunction in the transmission sensor or wiring. This can cause the indicator to display incorrect information about the gear the vehicle is in. It is recommended to have the vehicle inspected by a mechanic to diagnose and fix the issue.
Remove the cover plate and you will find the numbers stamped on the ring gear side which are two set of numbers divided within a dash, divide the smaller into the larger to come up with the ratio.