The speedometer in a 1987 Chrysler LeBaron may not work due to a faulty speed sensor, which sends the vehicle's speed information to the speedometer. Additionally, issues such as a broken speedometer cable, electrical problems, or a malfunctioning instrument cluster can also cause the speedometer to fail intermittently. Checking the connections and replacing any damaged components can often resolve the issue.
The Lebaron was no longer in the lineup for Chryslr in 2006. The Chrysler Lebaron was produced between 1977-1989,and was then phsed out by Chrysler due to weak sales.
The last Chrysler LeBaron was in 1995. Both engines available that year had timing belts.The last Chrysler LeBaron was in 1995. Both engines available that year had timing belts.
There could be a few things on a 1995 Chrysler LeBaron causing the distributor not to have power. But first I would check the spark plugs and see if maybe they have gone bad.
Most would beMost would be
The odometer is broken and needs replaced.
You will find it (the PVC valve) in the same place as you would on a 1995 Lebaron 3.0. I own a 1990 Chrysler lebaron 3.0 v6 and found the PVC valve in the same spot. Look up where to find the PVC valve on a 1995 lebaron 3.0 on this site. Best of luck.
no
TCM Malfunction, And/Or Speedometer Sensor Malfunction.
There could be a few reasons why a 1990 Chrysler Lebaron will crank but not start. The fuel pump could be out or the car could be out of gas. There may be a malfunction in the ignition system causing no spark.
you have to push down on the tension pulley, then you would get slack in the belt
it seizes thru lack of use... overhall it..
Knowing the way Chrysler often interchanges parts from many different cars, I would assume it would be about the same.