0
What else can I help you with?
What Honda Civic engine will fit in a 1994 Honda Civic ex?
b18c1, b18a1,b16 with custom or hasport motor mounts and the engine harness
Does a 1991 Honda Civic SI engine fit a 1990 Honda Civic DX?
Yes it will. Make sure you replace your motor mounts as they are most likely torn.
Will motor from 1996 Honda acord fit 2000 Honda civic?
yes. it requires mounts and loom. but any vtech engine will fit
Can you put an 2.2 liter evgine in a Honda civic?
If it is a Honda engine then yes you can. It sounds like your talking about an H-22 out of a Prelude. Look for Hasport motor mounts, I'm fairly certain they make some. You will have to grind your old motor mounts out, drill through your frame, and bolt in the new mounts.
Will a 1997 Honda Civic engine work in 1995 Honda Civic?
yes, im guessing its a stock d series engine. if both had vtec you will ned minor modifications and if the new engine has vtec where as the 95 did not, you will need a new computer/ wire harness. motor mounts will be the same as well
1997 Honda has a engine knock?
You should check your motor mounts
Can you put Honda Prelude motor in 92 Honda Civic?
Yes, with custom mounts available online. You will need the complete swap.
What will a 93 1.8 Acura engine fit in?
That engine would fit any Honda civic 88-00 with the right motor mounts, and will fit right in into any other Acura integra
How do you change motor in Honda Prelude si 4ws?
unbolt motor mounts use engine hoist
Will a Honda accord motor fit in a Honda Civic?
Yes, with custom mounts available for purchase online. In order for it to fit you will need the complete swap.
How do you swap a b18b1 into a 94 civic?
To swap a larger b18b1 engine into a 1994 Honda Civic the appropriate supplies must be bought and installed. The car will need axles, a wire harness, computer, transmission, and custom motor mounts.
How do you remove 1998 Honda civic automatic transmission?
Removing the transmission on a 1998 Honda Civic takes time as it engine will need to be remove as well. The engine mounts will need to be removed, coolant drained, hoses removed and shift linkage removed. When everything is properly loosened, using an engine hoist, lift the motor out. Disconnect the transmission from the engine and replace the unit.
