Should work provided it is the same engine set up.
yes
No. The 4WD transmission has a different tail shaft assembly because the transfer case bolts directly to it.
A 6 cylinder will match a 6, and the 4 cylinder transmission but be matched to another 4 cylinder but as long as your stay with the same engine size they are interchangeable. The transfer cases are also interchangeable. The only thing that varies between a 4 and 6 cylinder transfer case is the output spline teeth count (21 for a 4, and 23 for a 6) which can be swapped between the two.
Yes, with the 1995 transfer case to match !
You have to change the tailpiece on the transmission to one from a 4x4 transmission so the transfer case will bolt to it There is probably more to it than that, depending on the transmission. Usually the output shaft of the transmission has to be changed, and that means disassembly of the entire transmission. Research the exact transmission and transfer case combination before you buy a 2 wheel drive transmission and HOPE it will fit.
As long as the engines are the same the trans should fit
Yes, a 205 transfer case can be adapted to fit a 4L60E transmission, but it requires specific modifications. This typically involves using an adapter kit designed for this purpose, which may include an adapter plate and possibly a different output shaft. Additionally, it's important to ensure that the input of the transfer case is compatible with the transmission's output. Professional installation is often recommended to ensure proper alignment and functionality.
The transmission for the 4x4 has a different tailpiece so the transfer case can be bolted to the transmission The tailpiece on the transmission would have to be changed
It should, they didnt switch to the AX15 transmission until 1997. So from 89 to 96 it remained unchanged.
yes
not eactly you will need a transfer case
Jeep Wrangler YJ 2.5 engine, trans is a AX5