No. The higher HP Cummins require a different ECM. The increased HP engine was programed differently and was usually a *Celect Plus* . Also be aware that the ECM plug has a different wiring cofiguration and will not simply plug inton your OEM wiring harness.
Lots of places install them. Shops that install radios in vehicles will usually sell and install remote starters. Call around.
No, install it now!
No, They don't You can have them replace and install wiper blades for about 14 Bucks
first install new carb gasket to intake manifold and then 4 nuts hold the carb to the intake studs and then install the throttle linkage to the carb.
HOW DO YOU REMOVE AND INSTALL A SPEEDOMETER SENSOR IN A 2001 FOR ESCORT ZX2,AUTO.
If the hardware meet the minimum requirements most W XP PC's can install and run W 8.
Engine is the same, injectors and computer are different.
Yes
First, you have to change the ECM settings.
Yes the block will fit if you have the 03 engine mounts, you will have to have some knowlege on wiring to make everything work on the electrical side of things
Ford Cummins provides access to specially made parts, such as engines, for Ford trucks including efficient diesel engines. They also sell conversion kits as well as provide services to install them for the customer.
try to download it from the internet first then use an anti virus to check to make shere there are no spy were or other stuff that are no good for your comuter if you cant find it on the internet then i dont no but buy it
Install a hydrogen fuel cell. Google fuel cell llc. I noticed their first cell produce is for the N14
A screwdriver, and possibly a drill and stud finder to get started.
Take out the old censor and install the new censor just till the face just touches and back it off a quarter turn and then tighten the lock nut then plug in harness and your ready to rock and roll.
Check the venting and possibly install a trap
It is meant to only take one. You can try and have more than one custom put in for you but it isn't an easy task.