0
What else can I help you with?
What size Allen wrench do you need Lincoln Navigator front brake calipers?
You need 3/8 Allen key.
What is the wrench size to take off the frant brake pads of a 2001 Saturn LS?
You need a 12 mm wrench, not Allen key.
What size Allen or torque socket is needed to loosen the brake calipers on a 2005 Ford Escape?
I just did my 2005 Ford Escape front brakes and the caliper was 7mm Allen and main holder is 18mm ...RRR Wis.'
What size hex bolt on brake caliper on 2005 grand caravan?
For the front I believe a 15/16 socket will work. The rear I used a 7mm Allen wrench
How does a brake bleed screw work on a 1998 Nissan Pathfinder?
The bleed screw on the calipers of brake systems are for 'bleeding' air out of the brake lines.
What size wrench do you need to remove brake calipers on a mazda 5?
7mm Allen wrench
What size Allen wrench do you need Lincoln Navigator front brake calipers?
You need 3/8 Allen key.
What size Allen wrench to remove the front brake calipers on a 2000 ford focus?
7mm
What size Allen wrench needed to remove front brake calipers on 2006 sebring?
I believe that will be a 7mm Allen key.
What size Allen wrench for brake calipers on 1997 Saturn sc?
It's 12 mm bolts, not Allen key.
On a 1992 Chevy lumina van there are Allen head bolts holding on the brake calipers what size Allen wrench do you need to remove those bolts?
3/8" Allen wrench.
What size Allen wrench do you need to remove brake calipers on an 03 Chevy cavalier?
3/8"
What size hex wrench is needed to remove front brake calipers from a 96 Pontiac grand-am se?
3/8" Allen wrench
What size wrench do you need to change the brake calipers on a 2004 Chevy silverado?
A 3/8 Allen key.
What size Allen wrench to remove front brake caliper 2005 Escape?
On some later model Fords the calipers have 7mm Allen heads, -an unusual size.
What size allan wrench fits a KIA brake caliper?
Almost all Kia calipers are held with 14 or 17mm bolts, NOT Allen screws.
What size is the that holds the front brake rotors on a 1993 Chevy pick up?
If your asking about what size wrench is needed to remove the bolt that holds the front brake calipers on a 93 Chevy pick up, it would be a 3/8" allen wrench.
