Yes, automotive bulbs have more than one for turn and tail lights. 3 way bulbs in house lamps have 3.
The filament on normal light bulbs require a higher current of electricity to light up, and are more resistant to electricity as well. This causes it to use more electricity and generate more heat.
LED light bulbs definitely are more energy efficient than regularly normal light bulbs. Depending on the usage, LED lights can also last maybe twice or three times as much as regular bulbs. LED ones are better.
Incandescent bulbs or if you prefer, plain old fashioned light bulbs, the ones with a filament (the bit of wire inside) that gets very hot and gives off light. They tend to give off a bit more at the red end of the spectrum, particularly the lower power ones but they do give off all the colours. Some run the filament at a sufficiently high temperature to give a pretty balanced white light. Most of the modern energy efficient bulbs give off light at a limited number of frequencies but much more light per watt of power that goes in.
As an incandescent light bulb is used, tungsten slowly evaporates from the filament causing it to get thinner. When it gets too thin it can no longer carry the current and part of it melts causing the bulb to blow out.
Brightness of a light bulb depends on the power, current, resistance and size of the filament. Lumens is the unit of measurement for the brightness of a bulb. A bulb has more brightness if there is more power and current. Greater the resistance, less is the brightness.
Yes
Fluorescent lamps are brighter than filament light bulbs because they produce light by exciting mercury vapor and phosphor coating, which emits more visible light compared to the incandescent process of heating a filament wire to produce light. Additionally, fluorescent lamps are more energy-efficient and have a higher luminous efficacy, meaning they produce more light for the amount of energy consumed compared to filament light bulbs.
Lewis Latimer improved the light bulb by inventing a carbon filament that made bulbs last longer and produce steadier light. His filament was a key advancement in making light bulbs more practical for everyday use.
The filament on normal light bulbs require a higher current of electricity to light up, and are more resistant to electricity as well. This causes it to use more electricity and generate more heat.
Fluorescent light bulbs use gas and phosphor coating to produce light, while incandescent light bulbs use a filament that heats up to produce light. Fluorescent bulbs are more energy-efficient and last longer than incandescent bulbs, but they may have a flickering effect and contain small amounts of mercury. Incandescent bulbs are cheaper upfront but have a shorter lifespan and are less energy-efficient.
Incandescent light bulbs contain a metal filament (normally tungsten). When electricity flows through the filament, it gets very hot, causing it to emit light. They are inefficient because most of the electric power goes into heat. Fluorescent light bulbs contain a circuit that increases the voltage of the electricity, which then ionizes mercury vapor. This ionized mercury emits ultraviolet light, which causes a coating on the inside of the glass bulb to glow ("fluoresce). They are more efficient, but many emit an ugly color of light.
Filament light bulbs are not very energy efficient, converting only about 5-10% of the electricity they consume into light, while the rest is lost as heat. This inefficiency is why other types of lighting like LED have become more popular for their energy-saving benefits.
Mains filament
Thomas Edison used a carbonized bamboo filament for his early incandescent light bulbs. He later switched to a carbonized cotton thread filament, which was more efficient and long-lasting.
Fluorescent light bulbs are more energy-efficient and last longer than incandescent light bulbs. They produce light by exciting mercury vapor, while incandescent bulbs produce light by heating a filament. Additionally, fluorescent bulbs are typically more expensive upfront but can save money in the long run due to their lower energy consumption.
Incandescent light bulbs tend to get the hottest compared to other types of light bulbs, such as LED or CFL bulbs. This is because incandescent bulbs produce light by heating up a filament inside the bulb. LED and CFL bulbs produce light through a much more energy-efficient process, which generates less heat.
LEDs produce visible light and not heat. Filament bulbs use much of their energy to produce heat. The LED bulb produces more light per watt consumed.