You can find your 1999 Ford Expedition front windshield wiper fuse in the fuse box. The windshield wiper fuse will be in the second column, fourth from the top.
keys have to be reprogram to the cluster
on my 98, its under the wiper fluid tank
Windshield Wiper Motor Removal & Installation Front 1. Turn the ignition switch to the ON position. Turn the ignition switch ON until the wiper blades are straight up, then turn the ignition switch OFF. 2. Disconnect the negative battery cable. 3. Remove the right-hand and left-hand windshield wiper arm and blade assemblies. 4. Remove the cowl top vent panels. 5. Detach the electrical hardness connector at the windshield wiper motor assembly. 6. Remove 3 wiper motor (module assembly) retaining bolts and remove the module assembly from the vehicle. 7. Remove the wiper linkage retaining bolt and remove the linkage from the wiper motor. 8. Remove 3 retaining nuts and remove the windshield wiper motor. To install; 9. Place the windshield wiper motor in position and install 3 retaining nuts. Tighten to 10-12 ft. lbs. (12-17 Nm). 10. Connect the wiper linkage to the windshield wiper motor and install the retaining bolt. Tighten the bolts to 14 ft. lbs. (20 Nm). 11. Place the wiper motor (module assembly) in position and install 3 retaining bolts. Tighten the bolts to 6 ft. lbs. (9Nm). 12. Install the electrical hardness connector to the windshield wiper motor. 13. Connect the negative battery cable. 14. Allow the windshield wiper motor to cycle several times while checking for proper wiper motor operation. 15. Turn the windshield wiper motor to the OFFposition to park the wiper motor in the park position. 16. Install the cowl top vent panels. 17. Install the wiper arm and blade assemblies. Install the retaining nuts and tighten to 22-29 ft. lbs. (30-40 Nm). 18. Connect the negative battery cable. 19. Check the windshield wiper motor for proper operation and the wiper arms for adjustment.
each spark plug has own coil must remove coil first to get to plug
To locate the dash lights fuse on a 1999 Honda Accord to find out if it is causing the dash lights do not work when you have the parking lights on after installing an after-market radio, check the owner's manual. You can also find a fuse diagram at most auto part stores.
firewall 4 - 8 3 - 7 2 - 6 1 - 5 front
it is located on the front of the wiper motor.
The 1999 Ford Expedition takes 20" wiper blades on both sides front and a 16" rear wiper. See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
On the top of the truck
On a 1999 Ford Expedition : It's supposed to be at the front of the engine compartment , on top of the radiator support
28", I just replaced mine
The 1999 Ford Expedition takes 20" drivers and 16" passenger side wiper blades. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The 1999 Ford Expedition takes 20" drivers and 16" passenger side wiper blades. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The 1999-2000 Jeep Grand Cherokee takes 21" replacement windshield wiper blades on both sides front and an 10" or 11" rear wiper blade.
The 1999 Subaru Impreza Wagon has the most common hook-end wiper arms on both front and rear. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
I believe it is on the turn signal lever , towards the inner section of the lever
The 1999-2002 Honda Accord takes 24" driver side and 19" passenger side replacement windshield wiper blades on the front.