Yes, you can use a torque wrench in both directions.
You get the manual for the engine that you are replacing the plugs in then you use your torque wrench and tighten to the specified torque. If you have an aluminum head, be super careful and be sure to use the correct torque spec.
Without seeing your situation. If you are unable to loosen a bolt then use a longer wrench to put more torque on the bolt head. If the bolt is loose but stuck in the hole use a drift punch and a hammer to tap it out.
i dont know exact size wrench but if you are having trouble making wrench fit, u need to use metric wrench
A monkey of course! Seriously, a monkey wrench would probably be used mostly by plumbers but anyone could use one as you would use an adjustable wrench. A monkey wrench came along with the original tool kit that came with your new model T or model A Ford way back when. The inventors name as CHARLES MONCKY( that's where the name for the wrench came from
use an impact wrench
Use a torque wrench that is graduated in ft. lbs or do the math.
A torque wrench, usually a power torque wrench
as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque as long as your extension is 90 degrees from the handle it will not affect your torque wrench. if you use a super long torque wrench you may lose a little torque in the extension it self but should not affect torque. an extension affecting the wrench in lenght like a crows foot will affect torque
You don't use a torque wrench to loosen ANYTHING. -It is only for tightening nuts and bolts to the correct torque.
No
An Impact wrench is for a totally different use. A torque wrench will let the user know when a certain torque has been achieved in tightening. The impact wrench is for removing very tough nuts under impact of a hammer.
After torqueing I would use a regular ratchet with the angle gauge so you don't damage or through off the torque wrench calibration.
To properly use a torque wrench for cycling maintenance, first, select the correct torque setting for the specific component you are working on. Next, ensure the wrench is properly calibrated and set to the desired torque level. Then, apply the torque wrench to the bolt or nut and turn it until you hear or feel a click, indicating that the correct torque has been reached. Avoid over-tightening, as this can damage the component.
spanner or a torque wrench
Your torque wrench may not be clicking because it could be out of calibration, the internal mechanism may be damaged, or the torque setting may be too low for the fastener you are tightening.
To measure torque by hand, you can use a torque wrench, which is a tool that allows you to apply a specific amount of force to a bolt or nut. The torque wrench will indicate the amount of torque being applied, usually in units like foot-pounds or Newton-meters. Simply adjust the torque wrench to the desired torque setting, then apply force to the bolt or nut until the wrench clicks or signals that the correct torque has been reached.
Use a torque wrench with the correct setting for your motor. See related link.