0
What else can I help you with?
What is the gap for the rocker arm when I am at the TDC thankyou?
if you are asking about the valve adjustment it varies. we will need more information such as make, model, engine size, etc.
What is the ignition coil gap setting for a Honda GC160 small engine?
The thickness of a business card!
What is the spark plug gap for a 2000 scenic 1.6 16v?
The recommended gap is .028.
What is the Spark plug gap corsa 1.2 m reg?
The spark plug gap is 09.96 The spark plug gap is 09.96
What is the distibutor point gap suppose to be set at for 1971 ford 360 ci with four barrel?
If the 360 is in a F100 the point gap is .021. If the 360 is in a F250 or bigger the point gap is .017.
What is the gap on the rocker arms for a 94 Chevy s10 4 cylinder 2.2 liter engine?
rocker arms can be tightened right down as their is a shoulder on the stud.
How do you tell which rocker tip is noisy on your el falcon?
While the engine is not running you measure the 'rocker gap' between rod and rocker with a 'feeler gauge' . Each engine has specs for this gap, and if it's too wide that's the noisy one.
What is the spark plug gap for a Honda accord LX 2.2?
Until I get the year the gap specs for this vehicle range from .032 - .028. Under your car hood there will be a sticker that gives you your engine specs such as the year what size motor and maybe some vacuum diagram. It should also have the gap specs for your motors requirements on that sticker aswell.
How do you install rocker arms on a goodwrench 350?
Any under the hood components will have to be moved to gain access to the valve covers. Remove the covers. The rocker arms are held in by one nut per each rocker. The rockers need to be unbolted, removed, and the push rods inspected. the arms need to be set to the gap desired, depending on how the engine will be used. Reassemble the parts on the engine.
What are the specs for points and plugs gap on a 1975 Harley sportster 1000 cc?
ALL HARLEYS WITH POINTS HAVE THE SAME POINT SPECS:.018"POINT GAP AND.025"PLUG GAP..
Honda CB 650 valve clearance?
The intake is .002 and the Exhaust is .004 cold. Instrustions say the gap is measured at the cam/rocker. Not between the valve stem and adjust screw.
What is the gap on rocker push rods on a 84 Chevy 350?
If it has the factory hydraulic camshaft there is no gap or backlash.
What is the spark plug gap on a 2007 Honda accord?
What is the spark gap plug setting on a 2007 Honda accordAnswerwhat is the spark plug gap setting on a 2007 Honda accord?
How do you gap the piston rings on a 86 cutlass?
You will need feeler gauges, a ring spacer and separation tool, the correct specs for their correct placement on the piston and the gap specs.
What is the 1988 Honda vlx shadow 600 spark plug gap?
Depends upon your type of spark plug. Check with your retailer (atuo parts store) and they with have specs for the appropriate gapping
What is the spark plug gap setting on a 2007 Honda Accord?
What is the spark gap plug setting on a 2007 Honda accordAnswerwhat is the spark plug gap setting on a 2007 Honda accord?
Why do the rockers make noise?
Because the gap between the rocker and the valve is too big and what you hear is the rocker slapping the valve stem. Get yourself a manual for your car and find the valve gap so you can adjust them properly.
