try using mineral oil or paint thinner if it wasput on within the last 24 hrs. you could also try hand cleaner without pumice or grit. soak a clean soft cloth and rub. keep the vehicle out of the sun. you may also allow the soaked cloth to cover the stain for a few minutes to soften it and then rub.
You should check the label on the specific product you're planning to use. If the label states it will adhere to wood with an existing coating, then it's fine to use even over an oil-based stain. (This is because once thoroughly dried, oil-based stains behave the same as water-based stains.) Some products, however, will require the existing stain to be stripped from the wood, or to apply a primer coat over the existing finish before applying new stain.
No, it will not lighten stain, just add another layer. The only way I have ever been able to lighten stain is to sand it off carefully.
All of it. Otherwise the latex stain will seal the surface of the wood and the oil will not be able to penetrate into the wood. Sanding won't remove all of the residue. You'll want to use a paint stripper/stain remover too.
If you paint over the "weathered" paint, it will chip and cause the stain to come off. Also, the stain needs a clean sanded surface in order for the wood to absorb it. Otherwise, there is no reason to use stain.
Yes, if it's a gel stain. However, if it's a penetrating stain it will not dry correctly. If you try to clean it, it will smear. If you put a clear topcoat on it, the topcoat will smear the excess stain.
You should check the label on the specific product you're planning to use. If the label states it will adhere to wood with an existing coating, then it's fine to use even over an oil-based stain. (This is because once thoroughly dried, oil-based stains behave the same as water-based stains.) Some products, however, will require the existing stain to be stripped from the wood, or to apply a primer coat over the existing finish before applying new stain.
Carefully scrape with a razor blade
There are a few ways one can remove wood stain off of concrete. One way is to use a sandblaster to remove the stains. Another method is using wood bleach, water, and a scrubbing brush.
No,Any kind of sealer you try to put on after will lift off the dried stain. And the exess stain, even when dry, will rub off on anything that touches it.If you can't get the color dark enough, they do make colored sealers you can spray or brush on.
put more wax on to wax it off
NGR stain is a stain (the kind found in the paint aisle, not the kind on your shirt) that will not make the wood grain fibers rise up from the surface of the wood. Raised grain may have to be sanded off.
No, it will not lighten stain, just add another layer. The only way I have ever been able to lighten stain is to sand it off carefully.
You can wash it off with a moist sponge, but it is likely going to still leave a stain. Drywall is very porous. It is basically paper over chalk. There is just no way to remove some stains. If you want to paint over, but the wood stain keeps bleeding through, cover the stain with a product like Killz. It sometimes takes a couple of coats. Once the Killz is totally dry, the stain should quit bleeding though. It can then be painted over. Just keep in mind, if you are using a water based paint, use water based Killz. If you are using an oil based paint, use an oil based Killz.
The car was based off of the carriage hence the name.
All of it. Otherwise the latex stain will seal the surface of the wood and the oil will not be able to penetrate into the wood. Sanding won't remove all of the residue. You'll want to use a paint stripper/stain remover too.
If you paint over the "weathered" paint, it will chip and cause the stain to come off. Also, the stain needs a clean sanded surface in order for the wood to absorb it. Otherwise, there is no reason to use stain.
Yes, if it's a gel stain. However, if it's a penetrating stain it will not dry correctly. If you try to clean it, it will smear. If you put a clear topcoat on it, the topcoat will smear the excess stain.