0
How do you take out broken bolt from break pad of Honda accord?
Wiki User
∙ 17y ago
I suppose it depends which one. Without being able to actually see the situation it is hard for me to advise. If youe are referring to one of the two long bolts which actually hold the calliper in place, this may be tricky. There are things known as easi-outs or they may be named differently elsewhere. These objuects have a reverse thread thing going on, you drill the appropriate size hole into the head of the bolt and screw this thing in anticlockwise, if you have succeeded in drilling the correct sized hole at a suitable depth, the easi-out should bite into the metal of the bolt and allow you to unscrew it. This answer may be wholly unsuitable for your situation as I need to visualise the predicament.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What do you do if pulley wheel bolt is broken on a Honda Prelude?
Depends on which pulley but most have several bolts holding them on. You can remove the broken bolt or simply not worry about it.
How do you remove the filler bolt on a 2004 Honda accord automatic transmission?
should not have a filler bolt should just fill straight thru the dipstick pipe on transmission
How do you remove a broken crankshaft pulley bolt on a 1992 Honda Civic?
My bolt broke on my SB Chevy so I'm assuming your Honda can be fixed in a similar way. I drilled a hole in the bolt and used an extractor. Then, I had to re-thread the hole w/ a larger tap-die. So far it has held up - 1 year later. Hope that helps.
Where is the engine block drain to remove when replacing antifreeze on a '91 Honda Accord?
Gregory, to get at that drain bolt you have to get under your car. It is located slightly above the oil filter. I am planning on changing my radiator and will be doing this as well. Good luck.
How do you remove the front wheel bolt of a 1991 Honda Accord?
Wheel bolts go through a hole in the hub and are held in place by a knurl toward the head of the bolt. Search napaonline for a picture of one. To remove just take off the wheel and pound on the stud where the lug nut was. You probably have to spin the wheel until there's a place for the bolt to come out of the back of the hub.
How do you break loose the crankshaft pulley bolt on an 1996 Honda Accord?
You don't
How do you break loose the crankshaft pulley bolt on a 1997 Honda Accord?
Impact wrench. It's the ONLY thing that works.
How do you fix a broken valve cover bolt on a 1991 Honda Accord with a 2.2L engine?
If you cannot get the bolt out you will have to use a bolt extractor, sometimes called an Easy Out. Purchase one and the instructions will describe how it is used.
What is the bolt pattern for 1991 Honda accord?
4x114.3
What is the bolt pattern for a 1992 Honda Accord?
4x114.3
What is the license plate bolt size for 2009 Honda Accord?
It is a 10 mm bolt... called my honda dealer.......
Where is the filler bolt on a 2000 Honda Accord?
Filler bolt? Filler bolt for what? Please clarify.
Can you use a transmission from a 1990 or 1993 Honda Accord for your 1988 Honda Accord?
no u cannot do that bolt pattern is different
Will 1980 mustang wheels fit 1996 Honda Accord?
No, the bolt pattern on a 1996 Honda Accord is 4x114.3; the bolt pattern on a 1980 Mustang is 4x108 so wheels that fit on the mustang will not fit on the Accord.
2003 Honda Accord tire bolt pattern?
1990-1997 Honda Accord ALL - 4 x 114.3 1998-2002 Honda Accord 4Cyl - 4x114.3 1998-2002 Honda Accord 6Cyl - 5x114.3 2003-2010 Honda Accord ALL - 5x114.3
What is the bolt pattern for 2001 Honda Accord EX?
4x114.3 that's the bolt pattern
What is the bolt pattern on a 1988 Honda accord lxi?
4x100
