answersLogoWhite

0


Best Answer

d or d with a circle around it is used for normal conditions and the lower gears are used when carrying or pulling heavy loads , trailers, and steep up or down grades

also when road conditions such as gravel, snow, mud are situations were a lower gear may be applicable.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you use gear lever in auto transmission cars?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture
Related questions

How do you check auto gearbox level 53 plate citroen c3?

Auto gear box in new cars are sealed unit and cannot be checked. However if you take your car to Auto transmission garages, they can open it and replace the gear fluid and reseal it for a reasonable cost.


How do you tell which type of transmission you have in your 95 Jeep Cherokee?

Look at the gear stick, if its auto then you have an auto transmission, if its manual you have a manual transmission.


What could be wrong with a 1993 dodge ram 250 van if it will not move when transmission is applied?

The first and cheapest thing that comes to mind: is the shift cable still intact? There is a cable between the gear selector in the cab and the gear lever on the transmission. Crawl under the car, put someone inside to work the gears when you tell them to, find the gear lever, and have your friend move the gear selector. If the gear lever on the transmission does not move, the cable is broken.


Where is the neutral safety switch on 1989 firebird 2.8?

they're generally on the transmission where the cable from the shifter attaches to the lever on the side of the transmission that changes the 'gear' of the transmission (auto trans). manual transmissions usually have a switch on the clutch pedal (since you didnt specify which transmission type)


Why wont riding mower go in gear either forward or reverse?

If you physically can not move the gear shift lever into gear, it could be a problem with the shifter linkage or the transmission. If you can select a gear by moving the the lever which is attached directly to the transmission, it is the linkage. If the lever moves into a gear but the mower doesn't move, it could be a broken belt or a bad transmission.


What safety gear do you need for a car?

All cars have a neutral gear and all cars will start in neutral. It is recommended by all vehicle manufactures that the car's transmission be left in either park or neutral and that the emergency brake be set. If the vehicle has an automatic transmission, then PARK is the safest gear, but most cars have manual transmission and no park gear, so the safest gear is NEUTRAL with the parking brake engaged.


Why does my Auto transmission jerks in 2nd gear?

i have a 2002 saturn ls2. my transmission jerks in first and second gear and when i put on breaks. what should i do?


What solenoid would stop your car from shifting into gear?

On most modern cars there is a solenoid that triggers when you step on the brake to release the shifter from park. If the lever goes into gear but the transmission does not engage the solenoid is inside the transmission. Any more accurate info requires make, model, year and engine type.


Why wont your 1999 eclipse shift out of first gear?

Check transmission fluid level (auto) Change transmission fluid and filter (auto)


Is transmission range sensor in the transmission on a 2000 Ford Taurus?

No, it's on top of the transaxle very close to the linkage to gear lever.


What is meant by a auto transmission?

An auto transmission provides controlled power to the auto. Basically is adapts the output of the engine to the drive wheels. There are often multiple gear ratios as speed varies.


Where is the button to turn on and off Overdrive in almera 1.8 auto SE?

the button is by the gear selector lever