REMOVE SQUARE PLASTIC PLATE(I USED A STANLEY BLADE)TO REVEAL 4 XPLY SCREWS ,NO NEED TO REMOVE JUST SLACKEN THEM AND PULL MIRROR YOURS T,C U/K
You will need to remove the inside door panel of your 2002 VW Jetta. Remove the wiring harness from the mirror. Remove the side view mirror retaining bolts. Reverse the process to install the new side view mirror.
Remove the trim panel and there are screws that hold the mirror on inside the door. Go to this website. It will show how to remove the door panel and the mirror assembly. Only go to step 12. The rest is for installing their mirror. Do the reverse when reinstalling. kwmuth.com
Special glue requiredAvailable at auto parts storesThe glue comes in a kit with instructions on how to prep and apply. The trick is get everything very clean and follow all preparation instructions. Glue the metal button on, let it set for at least 24 hours before reattaching the mirrorhow do you remove the metal button on 1999 Avalon rearview mirror?ANS 2 - The best glue for this is 'Loctite' Auto Mirror Adhesive.
remove the screws which are hard to get to.
The clips at the top of the mirror should just slide up, allowing you to tilt the mirror toward you and lift it from the bottom clips.
The rear view mirror on a 2000 is glued to the windshield. Very carefully it can be pried loose. It may be necessary to insert a thin wire or razor edge to break the seal.
flamethrower
how to remove rearview mirror in 98 Lincoln continental
Hi How do you remove top nut from rear shock Toyota celica GTS 2000?
== ==
no
Flash the ECU
Remove the mirror and use a heat gun to remove the button. Caution: There is always the possibility that the windshield will crack.
you suck it up
Remove the clear lenses from the overhead lights near rearview mirror. Use a torx driver to remove two small screws holding bezel in place. Remove bezel. Now you can access the the two torx screws holding mirror.
it clips on to the base by little "hooks" on the outer edges
how to remove a passenger side mirror on a 2000 toyota 4 runner