0
How is the step stool used in the task of changing a light bulb?
Wiki User
∙ 11y ago
Light bulbs are often too high to reach, so stepping stools are used to add extra height in order to reach and replace light bulbs.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How did the light bulb change our lives?
The light bulb changed our lives a lot. If Thomas Edison (inventor of the light bulb) hadn't invented it, then we would all be stumbling in the dark. And since the time he created it, everybody is using it. Look around. Look in your house, and in your neiborhood houses. And in the schools. Do you see light bulbs? See, if you didn't have the light bulb, you're a step away from a blind mole.actually humphry davy made it , thomas made it better and more useful so he improved it but did not make the real thing :)
What is a small raised platform called?
a stool, plinth, table, step, platform, altar, stage...
How do you fix a blown light bulb?
After worrying about being the butt of many light bulb jokes and sifting through all those who thought a pot light would help them grow their habit at home, I ended up calling a guy who has a business called "Mr. Potlight". In the end, changing the pot light was easy, once you know how. Here's what you do: 1. Pull out the whole can that houses the light (the 'can' is the term used for the cylinder that surrounds the light). This is the hardest step because we are not used to taking out the whole light fixture when changing normal lights. Pulling this down takes a little bit of effort and most will be afraid of doing irreparable damage. Grab the outside circular frame and pull downwards away from the ceiling. It should come out fairly easily (don't worry about it falling because the wire attached to the bulb will keep it suspended). 2. Find the plug that attaches to the bulb and detach. 3. Attach the new bulb. 4. Push the entire housing/can back in the ceiling. 5. Turn on the switch. Voila!
How come when you step on the break your parking lights come on?
I dont know but i have the same problem in my 90 silverdo. In the older vehicles that used the 1157 bulb, if the bulb is installed incorrectly that can happen.
How do you Change a 2001 Accord Taillight?
In the truck there should be removeable panels. Open those and replace lights.Close, but no cigar. There are removable panels, in front of the tail lamps. Remove two PH screws and work the panels out. There are also tabs holding them in. The screws are away from you and not readily seen. The tabs are close to you. Now you will need an 8mm deep well socket, or nut driver. Remove three nuts w/ captive washers. Now pull out the entire rear (plastic) lamp assembly. Pull straight from the car body. Pushing on the studs (inside) will help. Bulbs are now accessible - the plugs are on the back side of the entire lamp housing. Tail/brake bulb is J29 - 12V 28/8 W.
How do you access the light bulb in a Hyundai 2002 Elantra sedan How can you find step by step directions?
which light bulb are you talking about?
How do you replace a light bulb that is over the stairs and can't be reached with a standard step or extension ladder?
Use a bulb changing tool. Basically it's a bulb holding device attached to a long or telescoping pole. Just do a search for " light bulb changer " and you will see that there are many to choose from. The home center stores carry them also.
How did you change a light bulb on a peugeot 207?
You first have to purchase the correct light bulb for your Peugeot 207. The next step is to remove the bolt that is holding the light bulb cover in place. Then, remove the light bulb cover. finally, replace the bulb.
How can you change a closed circuit to a open circuit?
u need a battery 2 wires and a light bulb. Step 1. Get the 2 wires and connect them to the battery step 2. connect the other side at the bottom of the light bulb the light bulb should light if it doesn't :(
How to change a open circuit to a closed circuit?
u need a battery 2 wires and a light bulb. Step 1. Get the 2 wires and connect them to the battery step 2. connect the other side at the bottom of the light bulb the light bulb should light if it doesn't :(
How do you change a front sidelight bulb on a vw passat 1.9 tdi 1999?
The first step is to open the car's bonnet the loosen the bolts holding the sidelight. You can then remove the light cover and remove the bulb. Changing takes the reverse.
How do you change a fog light bulb on a 2002 Kia Spectra?
2 STEP PROCESS: 1. TAKE FOG LIGHT BULB OUT. 2. REPEAT STEP ONE(1) IN REVERSE
How to Best Utilize a Ladder Little?
Small ladders, or step stools, as they are often called, can be helpful for a wide range of tasks around the home. It is generally a good idea to have one easily accessible in the home so that you can easily accomplish tasks that require you to access something that is up high. Otherwise, you may risk injury if you try to reach for something. The following shows how to best utilize these tools so that you can really get your money’s worth out of a ladder little. When you have to reach something that is on a high shelf and do not have anyone available to reach it for you, use a ladder little to reach it. Simply open up the folded step stool (follow the directions if it has any) and place it underneath the object that you need. Be very careful when stepping onto it, as using a step stool can prevent some injuries but can also lead to a fall. Step on the lowest possible step that will still allow you to easily reach the object, as this will pose less of a risk for injury. Grab the object that you need and fold the ladder back up. Return it to an area that is easily accessible for you, yet not in an area where it will impede movement of any kind. A step stool is also great for when you have to change a light bulb. Using a regular stool or chair to reach a light bulb can be more dangerous than a step ladder, as they do not provide the same level of support that a ladder does. Having a step stool handy can also inspire you to change a bulb that has been dead for a while. Follow the same steps for changing a light bulb that you would follow for reaching a high shelf. There are many uses for a ladder little, especially if you are not very tall and have trouble reaching many items. A step stool allows you to paint, reach, or adjust anything up high, and serves as a generally practical appliance to have readily available in your home.
What are the safety tips when changing a bulb?
The floor should be clean and dry to avoid slippage of the ladder. It is recommended to use a step ladder. You should also make sure that the switch for the light bulb is turned off before you start work.
How do you change the brake light bulb on a Peugeot 106?
Answer Step 1) Approach car. Step 2) Stand behind the boot (or trunk if you're American. Step 3) Push the boot release and lift the boot open. (REMEMBER TO UNLOCK THE CAR) Step 4) Look inside boot. Step 5) Pick up screwdriver Step 6) Use screwdriver to undo the screws holding the back of the rear light combo in place. Step 7) Take out light combo. Step 8) See which bulb is the brake light bulb (look for black marks where its burnt out) Step 9) Unscrew the bulb (by turning it COUNTER clockwise) Step 10) Take bad bulb to a rubbish receptacle and place inside (LITTERING IS ILLEGAL) Step Step 11) replace with NEW BULB Step 13) Put everything back
How do you use Japanese light bulb 100V in Malaysia which is 240V?
get a step down transformer whose output is equal to the voltage of your bulb
There are 3 sockets with bulbs how do you know which one is the brake light?
With all lights turned off,have someone step on the brake pedal. The bulb that illuminates is the break light bulb.
