answersLogoWhite

0

If you divide the watts of the bulb by the supply voltage, that is the current. For example a 60 w bulb on a 240 v supply gives a current of 60/240 which is ¼ amp.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How many amps does a 65 watt light bulb have at 120 volts?

The amps drawn by a 65 watt light bulb should be 65/120 or 0.54167. This fraction of an ampere may be restated as 541.67 milli-amps.


A 500 watt pool light pulls how many amps?

To answer this question the voltage of the bulb is needed.


How many amps does a two-bulb 32 watt 48-inch fluorescent light draw?

Each 32-watt bulb in a 48-inch fluorescent light typically draws around 0.27 amps. Therefore, a two-bulb setup would draw approximately 0.54 amps in total.


How many amps to light a 60 watt light bulb?

A 60 watt light bulb typically draws 0.5 amps from a 120-volt power source. This is calculated by dividing the wattage (60 watts) by the voltage (120 volts).


How many amps are required for 100W light bulb operate on 110 volts?

amps equals watts divided by volts.


How many amps in a low voltage light bulb?

Look on the light bulb for the voltage and the power in watts. Then divide the watts by the voltage and that gives the amps. Some CFL bulbs also state the current as well as the voltage and power, which is because they can have a poor power factor.


How many amps does a 40w light bulb use?

To calculate the current in amps that a 40-watt light bulb uses, you can use the formula: Amps = Watts / Volts. Assuming the bulb operates on a standard voltage of 120 volts, it would use approximately 0.33 amps (40W / 120V = 0.33A). If it's operating at 240 volts, it would use about 0.17 amps (40W / 240V = 0.17A).


How many amperes does a standard 60 watt light bulb use?

Watts = Volts X Amps. Amps=Watt / Volts. So, with a 240V mains, a 60W bulb draws 0.25amps. On a 12 system (car/auto) a 60W bulb draws 5 amps. On a 110V mains, a 60W bulb draws .55 Amps.


Can the resistance of a light bulb permanently change after it had been used for years?

240v is equal to how many amps


How many amps in a 50 watt light bulb?

To find the current in amps for a 50-watt light bulb, you can use the formula ( I = \frac{P}{V} ), where ( I ) is the current in amps, ( P ) is the power in watts, and ( V ) is the voltage in volts. For example, if the bulb operates at 120 volts, the current would be ( \frac{50}{120} ), which equals approximately 0.42 amps. If the bulb operates at a different voltage, simply adjust the voltage in the formula accordingly.


How many amps does a 65 watt light bulb use?

Amps x volts = watts So, assuming you are running on 110 volt line, the answer is 65 watts/110 volts=.591 amps.


How many amps does 65 watt light bulb draw?

A 65 Watt incandescent light bulb should draw 65W/120V = 541.67mA