No, but after changing make sure system is evacuated prior to charging
Can be old fluids. You should change it every 50,000. -ALL of it, not just the pan. It could have a broken or stuck accumulator.
Its a bonded screen, needs cutting out with cheese wire and new one bonded in with special sealer.
there s a cover over it is black or should be it has about 8 screws 8mm socket right on top ogf the engine it should say 16v zetec on it u take that cover off and u will see the spark plug wires
You will need a GOOD pitman arm puller.
This is a BIG job and beyond the back yard mechanic's knowhow and special tool inventory. Take it to a garage.
No
I had the same problem with my 98 ranger you need a a special tool to remove the brackets that hold it in place It is not an easy task
The special tool is available at most auto supply stores (AutZone, etc.).
You can't change all the fluid without special equipment. Take it to a transmission shop.
No
how to i change a clutch in a 1993 ford ranger
You need a special tool available at most auto parts stores (AutoZone, O'Reilley's, etc)
You need a special tool available at most auto parts stores (AutoZone, O'Reilley's, etc)
You need a special tool available at most auto parts stores (AutoZone, O'Reilley's, etc)
How to change dash lights on a 95 Ford Ranger?
No special hardware is necessary. Just change the location when you save the file.
leave this to the pros, struts are hard to do safely without special equipment to compress springs