Paint is a base.
Yes, you can.
Absolutely not and you should use the same manufacturer of the paint you have on there also. Sorry you can only use a chlorinated rubber base paint on a rubber base paint. If you try to paint with the chlorinated rubber base on top of a synthetic rubber base paint it will probably peel like a bad sunburn.
What they call "oil base paint" is really called "alkyd base paint." So yes, you can do that.
You can always paint latex ( water based )over an oil based paint as the latex just dries on the surface. However don't paint an oil based over a latex paint. Oil based paints need to absorb into the wood or other surfaces or it will just dry and flake off. For more information on the differences and when or not to use a latex or oil paint please see the following article. . http://www.ehow.com/how_4713170_between-latex-oil-base-paint.html
If the base coat used in your project is water base then yes, you bet you can. If there is any chance that the base coat used was an oil base paint then you cannot paint directly over it. The acrylic enamel will not adhere to the oil base paint and will begin to peel off as soon as it is dry. In which case a coat of primer is in order.
Paint stripper is an acid. Paint strippers work by penetrating the layers of the paint and the object that the paint is on. There are many types of chemicals used in paint strippers most of which are acidic.
please help me
Paint stripper is an acid. Paint strippers work by penetrating the layers of the paint and the object that the paint is on. There are many types of chemicals used in paint strippers most of which are acidic.
Neither, there are no associated properties.
Please tell me
To neutralize an acid, you can add a base to it. The base will react with the acid to form water and a salt, which will decrease the acidity of the solution. It's important to use the correct amount of base to completely neutralize the acid.
It is important to wear appropriate personal protective equipment, work in a well-ventilated area, use the appropriate concentration of the acid or base, and always add acid to water (not water to acid) to avoid splattering and potential hazards.
Some of it is...there are acid primers made to etch metal, but color coats are generally basic.
Hydrochloric acid - HCl Sodium Hydroxide - NaOH Hydrobrimoic acid - HBr Potassium Hydroxide - KOH Sulfuric acid - H2SO4
To effectively neutralize an acid, you can add a base to it. The base will react with the acid to form water and a salt, which will help balance the pH level. It is important to use the correct amount of base to completely neutralize the acid.
Acid plus Base gives a Salt and Water. Acid plus Metal gives Hydrogen gas and a Salt.
The equivalence point in titrating a strong acid with a strong base is significant because it marks the point at which the moles of acid and base are equal, resulting in a neutral solution. This is important for determining the concentration of the acid or base being titrated.