answersLogoWhite

0

Should be the same circuit for parking/tail/dash lights

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you change the license plate light on 2002 Mercury Villager?

The license plate lights are located just above the license plate. Open the tail gate part way to make removal easier (unless you enjoy squatting). Remove the Phillips screws and replace the affected bulb.


How do you wire license plate lights on a gas scooter?

to wire the license plate lights you must have lights and wire them to the scooter.


How do you change a rear license plate light in a 2000 Mercury Villager?

Just unscrew the two screws that hold on the small clear lens and pop the bulb out.


Are the license plate lights in the warning circuit for the brake lights of your 1986 Honda Prelude?

No, the license plate light is wired in with the rear tail lights, not the brake lights.


Do 2002 Ford Focus have 2 lights on license plate?

yes 2002 Ford Focus do have 2 lights on license plate


What number of fuse controls the license plate lights on a 2003 Expedition?

The license plate lights are not in a separate fuce by it seft. They are the same as your side marker lights. So, check if your side marker lights are working and if they are them is a bad license plate light bulb.


Where are the tag lights?

That would be the lights that illuminate the rear license plate.


Can a Nissan Quest flex plate fit a mercury villager?

Yes, they should be identical.


1994 Mercury Cougar has no tail lights or rear turn signals ALL other lights and flashers work License plate lights work back-up rear light work?

Check your fuses.


Do motorcycles need license plate lights?

yes.


Where is fuse for license plate lights?

Radio fuse


How do you remove plastic screws a holding rear license plate light housing in a 2000 Mercury Villager?

Just unscrew them, there's no trick to it. If they're stripped pry under the edge with a knife to get them to back out.