0
Key turns will not start it is like the safety switch on the clutch is not engageing any suggestions?
Wiki User
∙ 16y ago
several could bes. If there is no action, the engine does not turn, the rod running from the key switch to the ignition switch on the column could be broken, or the ignition switch itself could haved malfunctioned. If there has be work immediately privious to the problem, check for loose connection, expecially on the ignition switch.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where is the neutral safety switch on 1991 Nissan Sentra 1.6?
Depends on the transmission. If the car is a stick shift then the switch is at the back of the clutch peddle. Its a little plunger found just behind the top part of the peddle. If the car is an automatic then the switch is usually on the shifter. I'm not positive of this specific application though. You'll need to remove the shifter bezel off the console to access it...
Where is neutral safety switch located 98 suzuki sidekick 1.6 with manuel trans?
AnswerManual transmission would have a clutch safety switch not a neutral switchClutch switch usually located at the upper end of the clutch pedal under dash areaThe clutch safety switch is located on the inboard side of the steering wheel on the pivot shaft that holds the brake and clutch pedals. Mine sticks in very cold weather. I just reach under and give it push.
Can start car with screwdriver on starter changed starter still will not start with key?
Either your starter solenoid, if not check the neutral safety or clutch safety switch.
Where is the 2000 Toyota Tacoma neutral safety switch and how difficult is it to replace?
the neutral safety switch can be found by following the clutch pedal up into the bottom of the dash. its usually one or two 10mm bolts, and a connector. super simple to replace, it'll be the ONLY electronic piece connected to the clutch pedal
Is there a switch on the clutch that could prevent a car from starting?
yes, it is a neutral safety switch. When this switch has an open circut, it will not let the car start. The switch should be located under the dash on the top to the cluch pedal.
Where is clutch switch on a Chevy Tracker automatic?
If it is an automatic it will not have a clutch safety switch it will have a neutral safety switch
Where is the clutch safety switch located?
the clutch safety switch is located under the dashboard, on most cars, it is connected directly to the clutch pedel.
Where is the Clutch safety switch 1994 firebird?
behind the clutch.....
Where do you find the safety switch to the clutch to start the car?
DO YOU MEAN THE NEUTRAL SAFETY SWITCH?
Where is the clutch safety switch on a 1987 Nissan Pickup?
on your clutch pedal
Where is the neutral or safety clutch switch located on a 1987 Mazda b2000?
Clutch safety switch =- should be on the top of the clutch pedal under dash area Neutral safety switch could be at the lower end of the gearshift handle or at the side of the transmission
Where is the clutch safety switch at?
Clutch safety switches are usually mounted under the dashboard above the clutch pedal, so that they are activated when the clutch is depressed.
Where is the neutral safety switch in your 2000 Chevy s10 blazer manual transmission?
There isn't a neutral safety switch but a clutch switch that is located under the dash on the clutch pedal.
Where is the clutch switch located?
Clutch Safety Switch? Usually located at the upper end of the clutch pedal under dash area
Where is the neutral safety switch Subaru manual transmission?
The neutral safety switch or (clutch safety switch) is above the clutch pedal near the fire wall. It is a small black (on my Subaru Impreza) button that is about half way between the pedal and where the clutch arm is attached.
1988f150 cluch safety switch were is it located?
safety switch is located under dash on clutch pedal
How do you replace the clutch safety switch on a Ford Escort?
The clutch safety switch keeps the car from starting unless the clutch is pushed in. On the top of the clutch pedal there is a little black box with a plunger on it. When the clutch is pushed in the electrical connection to the starter solenoid is completed. The switch just unscrews from the bracket.
