0
What else can I help you with?
Speedometer don't work on 1998 ford escort zx2?
IT CAN BE ONE OF THREE THINGS. THE SPEED SENSOR IN YOUR TRANSMISSON MESSED UP, BROKEN OR DISCONECTED WIRE ON EITHER THE TRANSMISSOIN OR ON THE BACK OF THE GUAGE CLUSTER, OR THE CHIP ON THE BACK OF YOUR GUAGE CLUSTER HAS FRIED IN ON SPOT. OR IF YOU SPUN THE NEEDLE PAST 120MPH YOU COULD HAVE BROKE THE NEEDLE.
How do you open a hood on a 1990 Pontiac 6000 with a broken release?
Remove the plastic grill inserts from the front of the vehicle. Once removed you should be able to see the cable thatg leads to the hood latch. Use a pair of pliers or (needle nose pliers) and pull back on the cable(wire). Remember, the wire runs inside the black casing. Pulling on the entire black cable will do you no good. Pull on the wire. That should do the trick.
What is the difference between the single wire and 2 wire coolant temperature sensors on a 1996 Saturn?
In most cases the single wire sensor runs a temp gauge or temp light. The double wire sensor feeds info to the vehicle's computer and operates relays for the cooling fans. This may or may not be the case for your Saturn.
How does the resistance differ between long and short wires?
Generally, the longer the wire, the more electricity will be lost because of resistance.
Where is the IAT located on 97 LHS?
It should be in the air boot between the air filter box and throttle body (it is a two wire sensor)
What are the difference between a wire loop and a wire needle?
ewan ko
Why the magnetic needle gets reflected when placed near a current carrying wire?
The magnetic needle gets deflected near a current-carrying wire due to the magnetic field generated by the current. The magnetic field induces a force on the needle, causing it to align or deflect towards or away from the wire. This phenomenon is a result of the interaction between the magnetic field and the magnetic properties of the needle.
When a flows in a wire a compass needle near the wire will move?
The wire will move due to magnetic forces got from the compass needle since its a good conductor of electricity.
What are some popular techniques used in wire working jewelry design?
Some popular techniques used in wire working jewelry design include wire wrapping, wire weaving, wire coiling, and wire soldering. These techniques involve manipulating and shaping wire to create intricate and unique designs for jewelry pieces.
What is beaded jewelry?
Beadwork is the art or craft of attaching beads to one another by stringing them with a sewing needle or beading needle and thread or thin wire, or sewing them to cloth.Beads come in a variety of materials, shapes and sizes. Beads are used to create jewelry or other articles of personal adornment; they are also used in wall hangings and sculpture and many other crafts. How ever looking beautiful is basic moto for buying a jewelry from stores as jjensendesigns.com.
Why does a compass needle placed near a current carrying wire show deflection?
A compass needle placed near a current-carrying wire shows deflection because the moving charges in the wire create a magnetic field around the wire. This magnetic field interacts with the magnetic field of the compass needle, causing it to align with the direction of the current flow in the wire.
What is jewelry wire used for in jewelry making?
it is used to hold beads together.
What is the diameter of a 10 gauge ear piercing?
The gauge is the thickness of the jewelry (Usually the thickness of the wire the jewelry is made from but may also be the diameter of a plug or eyelet). From 20 gauge to 00 gauge, the smaller the number is, the thicker the jewelry is. After 00, the diameter of body jewelry is usually measured in fractional inches A 10 Gauge is smaller than 1/8th of an inch about 2.5 millimeters in diameter!
What kind of wire is best for learning wire crochet?
Wire crochet has become a very popular handicraft mostly used for making jewelry. The best kind of wire to use to learn the technique is a 22 or 24 gauge jewelry wire.
How do you make galvanoscope?
To make a simple galvanoscope, you would need a horseshoe magnet, a thin wire, a small compass needle, and a stand. The wire is wound around the magnet, and the compass needle is suspended in the coil of wire. When an electric current flows through the wire, it creates a magnetic field that deflects the compass needle, allowing you to visualize the current.
What will be deflection in compass needle of a magnet when a current carrying wire is placed over it?
The compass needle will turn until it's perpendicular to the wire, provided the current in the wire is enough to generate a magnetic field around the wire that's strong enough to swamp out the effects of the Earth's magnetic field. (That doesn't take much current.)
How do you Make handmade jewelry?
Go to a crafts store and find the section for making jewelry. There will be supplies and books there to buy. Get a few things and start. There are various technique used to make handmade jewelry, one of the oldest technique used for making handmade jewelry is WIRE WRAPPING. In wire wrapping, jewelry is made using jewelry wire and finding similar to wire (like head-pins) to make components. Wire components are then connected to one another using mechanical techniques with no soldering or heating of the wire. Frequently, in this approach, a wire is bent into a loop or other decorative shape and then the wire is wrapped around itself to finish the wire component making that loop or decorative shape permanent. Because of this technique for wrapping wire around itself this craft is called wire wrapping.
