I have a dark stain on a chair made from old wood.Now I would like to have it natural.Is there anything I can do to get this look
Use a paint and stain remover to pull out and remove the old stain. It may require more than one application of the remover to get all the old color out, especially if it is the overnight, environmentally friendly type. If it's available in your area and you don't mind using a very strong chemical, methyl chloride strippers are the strongest and fastest. Of course you'll want to wear heavy gloves, long sleeve shirt and long pants while you are using the strong stuff.
Once you've removed the old stain, clean it with mineral spirits to remove all traces of the stripper, then stain it whatever color you like, or leave it natural and coat with a polyurethane.
When painting and a stain is too dark, someone can rinse a brush and spread out the stain with a little more water. Some solutions like alcohol can also loosen some stubborn stains.
When a picture is too dark it was underexposed, usually because it was too dark to take the picture. But, there can be other causes.
No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes
All of it. Otherwise the latex stain will seal the surface of the wood and the oil will not be able to penetrate into the wood. Sanding won't remove all of the residue. You'll want to use a paint stripper/stain remover too.
No, it is intended for wood and soaks in too much to look good on concrete. HD sells a good variety of concrete stain.
Wood stain needs to be applied to something porous so it will be absorbed in. This does not include plastic. Paint will be your best option. A good paint store will help you with that faux wood look you are after. It's pretty easy to do this, so long as you use the right materials...and that you know how wood grain is actually composed. It has dark and light regions. You need some oil-based paint in the light-region color, gel stain in the dark-region color, a paintbrush and a graining tool. Paint the doors with the light paint and let it dry for a couple of days. Then apply the gel stain. Finally, use the graining tool to make the woodgrain effect--there are instructions on the back of the package. This works with other things too--steel entry doors in particular--and it looks good.
Yes, just like coffee and tea, cola and other "dark sodas" can stain your teeth. Carmel coloring and sugar rots teeth too.
It depends on the specific shades of black and brown stains you are working with. To achieve a desired dark brown color, you would need to experiment with different ratios. Start by adding a small amount of brown stain to a small portion of the black stain and mix well. Adjust the ratio by adding more brown stain if it is not dark enough, or more black stain if it is too dark. Once you achieve the desired shade, use the same ratio to mix the remaining 5 gallons of black stain.
It can be very difficult to try to lighten stain on wood once it is applied. The best way to do it is to sand the wood down and start over.
I had to sand it off as strippers didn't work. The rotory palm sander worked fine
If the stain is not too old, vinegar will lift most of it out.
Leaving a stain on too long generally stains everything; leaving little contrast. Leaving a stain on not long enough doesn't stain enough; leaving little contrast.
When a picture is too dark it was underexposed, usually because it was too dark to take the picture. But, there can be other causes.
Too Dark Park was created on 1990-10-30.
Flair pen will not cause clothes to rip. It is possible that scrubbing the stain too harshly damaged the fabric. If you treat the stain gently, there is no reason that the clothing should rip.
No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes
A foam roller might work, but a foam pad is better. Stain is too thin to go on with a regular roller.
A Gram stain refers to a staining technique for the identification of bacteria. A Gram stain done on a slide that was heated too hot during the heat-fixed smear will destroy the cell wall of the bacteria.