390 linear feet of wall space (150+45+150+45)
3900 Square feet of wall space (390x10)
3900/400=10 gallons for ONE coat
However 400sqft per gallon is a bit optimistic; add 10%
11 gallons
(6-ft x 172-ft) / (200 square feet per gallon) = 5.16 gallons
Yes, it really is.
gallon of gas in 1989 was about $1.02
There are four quarts to a gallon; therefore 2 quarts would be a half gallon.
what is the cost per gallon for desalinated sea water
900 Gallon Septic Tank (2 piece unit) 107" Long x 53" Wide x 59.5" Deep INLET 50.5" from bottom of tank to center of hole OUTLET 48" from bottom of tank to center of hole
a standard one gallon paint can's dimensions (6 ½" diameter x 7 ¾" h )
Dimensions are 28'' wide, 45" tall, and 60" long for a 275 gallon fuel tank.
72x24x24
The dimensions of a 10,000 gallon oil tank are 120 inches wide by 17 feet tall. A 10,000 gallon oil tank empty weights about 8,500 pounds.
It could be any set of three dimensions that multiply to equal 8,316.
You cannot. A gallon is a measure of volume, with dimensions [L3]. A milligram (not millagram) is a measure of mass, with dimensions [M]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information. A simple mental exercise will demonstrate that a gallon of mercury and a gallon of water will have very different masses.
There is no sensible answer to this question. A gallon is a measure of volume, with dimensions [L3]. A pound is a measure of mass, with dimensions [M]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information. A gallon of air will have a much smaller mass than a gallon of mud.
It can have any dimensions as long as they equal 8 cubic feet.
It could have any dimensions as long as they equal 1,069 cubic feet.
10.5' x 4'
The dimensions for a 20 gallon drum is 21.75 inches high, 18.25 inches inside diameter, and 18.75 inches outside diameter. It can accommodate a load of 199 pounds.