0
What else can I help you with?
Dual springs on cylinder heads vs single springs what's the purpose of dual springs?
There is one spring for each valve, if there are two intake and two exhaust valves per cylinder there will be twice as many springs per cylinder compared to an engine with one intake and one exhaust valve per cylinder.
What is the best type of valve used in heart valve replacement?
"As a registered nurse, I am aware there are two common types of aortic valves used for replacement. There are mechanical valves and valves from animals. The decision needs to be made with your doctor as with each there are positives and negatives. Choice on which valve will be determined by case to case."
Where is the power booster check valve located on a 1995 Chevy 1500?
The power booster check valve would be located where the vacuum hose is connected to the booster. The vacuum hose is connected to the valve and the valve is inserted into the booster. They are usually made of plastic.
What does a semi-lunar valves valve do?
Ze semi runar valve heps by doing what it does best. by contoling the frow of the brood frmo the ven tickle to arterie
How dangereous is a leaking valve in heart of young child?
It matters which valve is leaking, how much is leaking and the cause of the leak. It can be fatal but could be repaired depending on the condition of the valve and the particular valve affected. It is not wise the let the child to get overexerted and it is best to have a cardiologist determine all the variables involved with that particular child.
What size valve springs do you need for 500 lift cam?
You can use any diameter springs for that. Best to contact the cam manufacturer for a recommendation.
Are gx200 valve springs the same as gx160 valve springs?
Yes.. The combustion chambers are different
Do you take off the valve springs to get the head off?
No. The valve springs can remain on the head when removing the head.
What tool is used to install valve springs?
A valve spring compressor
Which 1 of the following 4 controls the opening of engine's valves is it the Camshaft the Crankshaft the Valve springs or the Combustion chamber?
The camshaft opens the valve via its Lobes, against the valve spring, to open. The valve springs closes the valve back.
What is the use of valve spring?
Valve springs keep valves firmly seated in the socket.
What is the best gun spring made today?
Wolff make the best springs as far as I know.
What keeps valves against their seats?
The valve springs.
What are marine outboard engine lifters?
Valve springs
What are the torque specifications for the valve springs after replacing the oil seals?
Valve springs are not torqued they have no bolts on them at all, they are held in place by keepers that fit into the notches on the end of the valves.
How do you remove valve springs?
you need to compress the spring with a valve spring compressor tool, and then remove the valve keepers, and retainer.
What do valve springs do?
It closes and keeps the VALVES shut when needed.
