you need to be more specific chevy 350's have been made since 1967 all the way up to like 2002 or so, and still available now from gm performance parts. in 2 or 3 variations.. and each series bolts up different, and each body runs a slightly different mount as well..
No it denfinately will not
yes
4.000 inches -- same bore size as a Chevy 350, the difference is a 327 uses a 3.250 stroke and the 350 uses a 3.480 stroke.
35 ft. lbs.
I have one in my 1988 Chevy K1500 with a 350.
yes the 4.3L vortech has the same motor mounts as the 350
If the Buick 305 is really a Chevy 305, then the motor mounts will interchange with a Chevy 350.
No, they will not.
No. You will have to get v-8 mounts.
yes.
NO, They are made different.
NO IT WILL NOT. Must use V-8 frame mounts and motor mounts.
7/16"
In 1970, the rating was 35ft/lbs.
No thay are not even close.
Get the motor mounts, trans mounts, transmission, radiator from a 1976 Malibu or Monte Carlo and swap them in.
To the frame or the chassis. The cool thng about 350 SB is you can move the motor mounts to change the weight transfer of the vehicle. Depends on what you use it for.