answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: What is the common method used to separate minerals from their ore by mixing finely ground ore with water to form a slurry?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture

What minerals are extracted from the ground during manufacturing of stainless steel utensils?

niobium and tantalum


What job do the roots of a plant do?

Provides anchorage for the plant. Provides a mechanism and increased surface area for the uptake/ absorption of water and minerals for the plant.


What is the construction process for ceramic capacitors?

Standard ceramic disc capacitors are constructed from two metallic electrodes separated by a very thin ceramic disc (serving as the dielectric) inside of a protective coating such as epoxy or other resin. The ceramic disc is produced from finely ground powders sintered at extremely high temperatures.


How did early people make paint?

They would get a pestle and mortar and grind natural minerals and pigments with linseed oils. Linseed oil will evaporate into the air leaving behind a resin binder that bonds the pigment to the canvas. This takes about a month. Many different rocks and mineral ores were ground up,even Egyptian mummies were ground to make a deep brown


You replaced the starter and battery on a 1994 Ford Taurus but still just clicks and will not start any ideas?

You may have a loose or corroded ground connection. Not just the battery ground but the engine to chassis ground. You may also have a bad battery cable. If you see swelling on any part of the cable, replace it. Make sure the connections are clean and tight. Did you replace the starter solenoid with the starter, or is it a separate item? If the solenoid is separate from the starter, it is probably bad. It is unlikely that the ignition switch is bad, but possible.