Want this question answered?
The wave length is the distance between the peak of one sound pressure or electrical wave and the peak of the next. It's also known as one cycle (1 Hertz).
The frequency of a sound wave determines the pitch. So if there is high frequency it means that the sound will also be high pitched. If it is low frequency that means the sound will be low pitched.
im not sure but i think you can use fishing line i used it and i doesnt sound that bad
The diaphragm is the part of the speaker that physically interacts with the air to produce sound. The electromagnets underneath the diaphragm create motion, and it is the repeated in/out movements of the diaphragm that change the position of the air particles in the surroundings, creating sound waves. Larger movements lead to a louder sound, whereas the frequency of the movement correlates to the pitch.
The second heart sound (S2) is a short burst of auditory vibrations of varying intensity, frequency, quality, and duration. It has two audible components, the aortic closure sound (A2) and the pulmonic closure sound (P2), which are normally split on inspiration and virtually single on expiration. S2 is produced in part by hemodynamic events immediately following closure of the aortic and pulmonic valves. The vibrations of the second heart sound occur at the end of ventricular contraction and identify the onset of ventricular diastole and the end of mechanical systole.
A sound spectrogram measures the frequency and wavelengths of sound waves. The frequency is measured in Hertz and the wavelengths are measured in meters.
500 hertz
There is no set length on any sound wave. Sound waves vary hugely in thelength that they can be.The length of any sound wave is (the speed of sound in the current medium)/(the frequency of the sound) In air at sea level, the wavelengths in the audible range of frequencies rangefrom 1.72 centimeters (at 20 KHz) to 17.2 meters (at 20 Hz) ... a ratio of 1,000.
The frequency of sound is measured in "Hertz (Hz)".
Frequency is measured in hertz. Cycles per second.
68 Hertz.
Hertz are a measurement of sound frequency.
That would also depend on the speed. Note that sound can go at quite different speeds, depending on the medium and the temperature. Use the formula speed (of sound) = frequency x wavelength. Solving for wavelength: wavelength = speed / frequency. If the speed is in meters / second, and the frequency in Hertz, then the wavelength will be in meters.
There is no such thing as a "frequency above hertz". Whatever the frequency, it will always be measured in Hertz.There is no such thing as a "frequency above hertz". Whatever the frequency, it will always be measured in Hertz.There is no such thing as a "frequency above hertz". Whatever the frequency, it will always be measured in Hertz.There is no such thing as a "frequency above hertz". Whatever the frequency, it will always be measured in Hertz.
Hertz (cycles/second) measures frequency or pitch. Decibels measures loudness or sound pressure.
Pitch and frequency both are measured in simple hertz.
Distance-wavelength lambda (λ) is measured in meters (m)Time- frequency is measured in Hertz (Hz)