According to that block number, it should be a 1980-1985 305 V8.
So to answer your question;
Any starter for a 1980-1985 Malibu, Camaro, Caprice, or Pickup should be the correct one.
check the engine block casting number
Blocks with the 010 casting number have a higher nickel content and are more desirable for performance applications.
1970-71 Chevrolet Small Block 400cid heads.
a welsh plug is a plug in the side of the block and the heads. these fill the holes left after casting.they actually allow the sand to be removed that is used during casting so as you have a hollow block which allows for the water jackets. in the USA these welsh plugs are called freeze plugs. they really do not stop the coolant from damaging the block if coolant freezes they are specifically to block the casting holes
starter is located on the side of the engine, down low and to the rear where the transmission bolts to engine block
Casting number is on the back, right hand side of the block just above the starter.
Jeep 258 engine block casting number.
behind the distrubitor cap Try behind the starter mount location. this is where i find most block castings no.
The casting number is on the passenger side of the block.Right above the starter.You may have to remove the starter to see it.
What engine casting number is 14010207
That casting number belongs to a 1971 Impala. It is a 400 small block chevy. These can be pretty good motors.
what does the casting number GM 3892657 say about this engine block
I have a dodge 318 ci w/ block casting number-4387550-31824 i need to know what year this is
What Chevy engine block has the castin I mean casting number 397004
motor #3978010
I am familiar with block casting in Fords...however I am not sure if the same rules reach to Chevrolet.With Ford, they began using this form of block casting in the late 1950's. They assigned each decade a letter which begins the casting number. 1950 began the coding with letter 'B'. Each subsequent decade received the following letter. The first number after the first letter is the year of that decade in which the part was modeled for.This means that your block casting number D9AE-6015-ED-3 is for a:D = 1970's9 = 1979This piece has a block casting number for 1979.
3963512 is not a part number. That is the block casting number for Big-Block 427 or 454 engines