Remove and reinstall the wheel. You do not have the lug nuts installed correctly. The wheel was not seated properly.
The wheel cylinder (used in drum brake applications) applies pressure delivered from the master cylinder via brake fluidto the brake shoes to pushagainst the brake drum to stop rotation.
If your talking about the brake bleeder, it is on the caliper/brake cylinder at the wheel.
If the tire locks up when you apply the brakes and you have drum brakes then you may have brake fluid leaking onto the brake shoes. If you have ABS then you may have a bad wheel sensor. The adjusters on the brake shoes are out of adjustment or broken. Springs or hold down hardware may be broken. Cracked brake linings. Backing plates are worn out.
I wouldn't say bad for your car however you may notice a wheel wobble when driving, if tis an alloy wheel get it checked incase the rim may have a hairline crack
it could be a dry wheel bearing, it could be worn brake pads, it could be a dry shockabsorber mount it could be a dry wheel bearing, it could be worn brake pads, it could be a dry shockabsorber mount it could be a dry wheel bearing, it could be worn brake pads, it could be a dry shockabsorber mount
you obviously need to get it checked..that shouldn't happen
check wheel bearings!
yes it did.
With each brake job.
The wheel may be bent. Take the vehicle to a trusted tire shop and have them remove and test the wheel to see if it is bent. The squeaking noise sounds like the brake pads are worn out. You need to have this looked into for the safety of you and your family.
When ever a brake job is done.
Bad tire? Bad wheel bearing? Bent wheel? Bent axle?
Loose wheel, bent wheel, Belt broke in tire,BAD wheel bearing. Check and repair as needed.
The front wheels of a car can wobble because the car's suspension is not in proper alignment. The wheels may also wobble if the rim is bent or if the tire is improperly installed
The wheel will begin to wobble and can eventually fall off if you don't get it fixed.
It is inside the wheel hub. The whole wheel hub has to be replaced.. its sucks but if you know how to work on cars its not much harder to replace then a brake job..
Could be the tires, or your front brake rotors